Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across North Las Vegas
If your driveway gate won’t open, or a slide gate grinds to a stop halfway, you need a straight answer and a real person on the phone. We work on gate motors and openers all over North Las Vegas, from the older low-slung homes near the 89030 core to the newer build-outs out past Aliante, and we answer the line around the clock. Adding an opener to a gate built in the 2000s boom is our bread and butter out here, and it’s rarely as simple as bolting on a motor. Call (844) 761-8729 for a free estimate and we’ll tell you what your North Las Vegas gate actually needs.
Why Gatewood Fence & Gate Sunrise Manor Is North Las Vegas’s Preferred Gate Motor & Opener Company
Gatewood is locally owned and owner-operated, the name is on the shop, the license number is published, and the person who picks up the phone is a live one, day or night. That’s the whole pitch, and it’s why folks across North Las Vegas keep calling us back. Our technicians have up to 25 years of experience, and we’re certified to service nine major brands, so we’re not guessing at your operator.
We treat repair as the first option, not the last. If we can fix the motor in your driveway instead of hauling it off or swapping parts that don’t need swapping, that’s what we do, and every job carries our 90-Day Done Right Promise stamped in writing. We’re straight with the pricing up front, and we honored it before the work starts. That alone won’t be every company in North Las Vegas.
We know these neighborhoods the way you do. In the 89084 and 89086 subdivisions, the gates are mostly builder-grade light steel off the boom, and we’ve seen where that fails. The name is on the shop and the shop is down the road. That’s the oldest accountability there is, and it’s why we’re the company North Las Vegas homeowners call.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in North Las Vegas
Motor Installation in North Las Vegas
Adding a motor to a gate that was built manual is the most common install request we get in North Las Vegas, and it’s the one most people underbudget for. In the planned communities up in 89084 and 89086, builders hung the gate and stopped there, with no conduit stub and no 120V drop run out to the hinge post. That means a proper install here usually starts with trenching new conduit through hard caliche, not bolting an operator to a pre-wired pad the way you could in an older custom build. We measure and price the whole path, then schedule it, because this isn’t a same-day bolt-on.

Motor Repair in North Las Vegas
When a gate opens a few inches and stalls, or reverses for no reason, the operator usually isn’t the only thing wrong. Out here the sun bakes 20-gauge steel gates until they warp and sag at the hinge post, and the motor gets blamed for a problem that started in the footing. Our first move is to check the hinge post and sag before touching the motor, because fixing the operator without the post means fixing it twice. We diagnose and repair on site, and we tell you straight whether a repair makes sense or a replacement is the honest answer.

Linear Motor Service in North Las Vegas
Linear is one of the brands we see most on driveways around Whitney and the north 89031 builds, and it’s one we’re certified to service. Their residential swing and slide operators are solid workhorses when they’re matched to the right gate weight, but a builder putting a light-duty Linear on a heavy steel gate is asking for early failure. We’ll check the load rating, the safety photocell, and the control board, then give you a written price before anything gets touched.

Slide Motor & Rack-and-Pinion in North Las Vegas
Slide gates in North Las Vegas have a harder life than most, because windblown desert dust packs the track and grinds the rack and pinion gears smooth over time. A gate that lurches and stops halfway is often telling you the track is fouled or a section of rack needs replacing, not that the motor is dead. We service and repair slide operators across the city, and we’ll also wire in battery backup so the gate still works through a summer power hiccup.
Trusted Brands We Service in North Las Vegas
We’re certified to service nine major gate operator brands, including Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule. What that means for you is simple: whatever motor is hanging on your North Las Vegas gate, chances are we know its control board, its safety setup, and its weak spots. We don’t claim to have every part sitting on a shelf locally, but we can usually get what you need in hand quickly. If you’d rather read up on the full range of work first, our Gate Motor & Opener team page lays it out.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor & Opener Problems We See in North Las Vegas Homes
- Builder-grade openers on overlooked gates. Boom-era operators were often spec’d for a lighter gate than what actually got hung, so a sun-baked, warped steel gate overloads the motor and burns it out early. The fix usually starts at the hinge post, not the control board.
- Gates installed manual with no power run. In a lot of the north-side subdivisions, the gate went up with no conduit or 120V drop to the post, so a motor gets bolted on with exposed wiring or a solar unit that can’t keep up in 100°F+ heat. Doing it right means trenching conduit through caliche.
- Dust and UV chewing up the moving parts. Windblown desert dust and relentless sun destroy rack and pinion gears, safety photocells, and keypad buttons, which is why you get phantom reverses or a gate that won’t respond. It’s the climate doing the damage, not a mystery.
- Hinge post movement in caliche. Monsoon storms and occasional flash flooding can heave footings set in the hard ground, throwing the gate out of square and overloading the motor. Safety edges and proper hinge correction are where a good repair begins.
Pricing for Gate Motor & Opener in North Las Vegas, NV
Here’s what the work honestly runs in North Las Vegas. A typical motor repair runs $180 – $420, depending on what’s actually failing and the parts involved. A slide motor service with rack and pinion work usually lands $250 – $550. A new motor installation starts around $650 – $1,400 for the operator and mount, but adding the power and conduit run through caliche can push the total past $2,000 in the planned communities where nothing was pre-wired. Battery backup and safety edge add-ons are quoted separately. We measure and give you a written price before any work starts, and that’s the number you pay. Estimates are free, so call us and we’ll put yours together.
We Also Serve Cities Near North Las Vegas
The same work carries over the line into the surrounding communities. We also take care of gates in Las Vegas, Sunrise Manor, Winchester, and Whitney, so if you’re in one of those, you’re in good hands. You can find more about our coverage and service on the North Las Vegas page, or just give us a ring.
Serving North Las Vegas, NV – Our Local Coverage Area
We serve North Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in North Las Vegas
It almost always involves more than bolting on a motor, because most gates in the north-side subdivisions were built with no conduit stub or 120V drop to the hinge post. A proper install means running new conduit through caliche, mounting the operator to suit the gate, and wiring in the safety photocell and entrapment protection. We measure and give you a written price first, then schedule the job. Call (844) 761-8729 for a free estimate.
Because a light-duty operator is being asked to move a heavier gate than it was built for, and 100°F+ heat makes it worse. Sun dries out the lubrication, warps the steel, and every cycle drags harder until the motor gives out. The fix is usually correcting the hinge post and sag, then matching the operator to the real gate weight. Call us and we’ll diagnose it before you spend on another motor.
We’re certified to service Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule. That covers most of what’s hung on gates across North Las Vegas, so you’re unlikely to get turned away over the brand. If your operator isn’t on that list, call and tell us what you’ve got. Estimates are free.
Yes. Any automated gate needs UL 325 entrapment protection, typically safety photocells or safety edges, to be code-compliant and safe. It’s not optional on a residential driveway gate, and it protects people and pets as much as it satisfies an inspector. We confirm the safety setup works on every job. Call (844) 761-8729 for a free check of what your gate has.
Usually it’s the track and rack, not the motor. Blown sand packs the track and wears the pinion gears smooth, so the gate binds and the operator strains until it stalls. That’s a repair, not a replacement, most of the time. Call us for a free estimate and we’ll tell you which one you’re looking at.
Call (844) 761-8729 for a free estimate. Whether your North Las Vegas gate needs a motor repair, a fresh installation, or help adding an opener to a gate that was built manual, we’ll answer the phone with a real person and give you a straight price before anything starts.
Written by the team at Gatewood Fence & Gate Sunrise Manor.