Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Las Vegas
If your iron driveway gate drags, buckles, or won’t latch, you don’t need a sales pitch. You need someone who knows why it failed and can weld it back into shape in your driveway. We work on gates all over Las Vegas, from the older west-side blocks near Sahara to the courtyard gates out toward the northwest valley. Las Vegas doesn’t rot gates the way the coast does. It cooks them. Heat cycling, UV, and windblown grit wear out hinges and hardware faster than most homeowners expect, and that’s exactly the work we do. Call (844) 761-8729 and a live person picks up, day or night.
Why Gatewood Fence & Gate Sunrise Manor Is Las Vegas’s Preferred Gate Parts & Welding Company
We’re locally owned and owner-operated, with our name on the shop and on every invoice. That means when a repair doesn’t hold, you call and we come back. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. No runaround.
Las Vegas homeowners have been burned by outfits that quote one price on the phone and charge another at the door. We don’t work that way. You get a written, upfront price before any torch touches metal. Our technicians bring up to 25 years of experience to Las Vegas gates that need real welding, not a swap-out upsell. We’re certified on nine major brands, including LiftMaster and FAAC, so we can handle the operator side once the gate itself is sound.
We answer the phone with a live person 24/7. Not a voicemail, not a call queue three states away, not a chatbot. When a Las Vegas gate is stuck open at night, you want a human on the line. That’s the whole point of how we run things.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Las Vegas
We repair first. If a part can be freed, straightened, or re-welded, we do that instead of selling you a replacement. Here’s what we handle most in Las Vegas.
Hinge Replacement
A gate sags at the hinge post, not in the middle, and that’s where we start. In Las Vegas, lift-off hinges seize from years of heat cycling and windblown desert dust, which is why a gate that opened fine last spring now drags on the ground. We free or replace the hinges, correct the sag, and check the hinge post footing so the fix actually holds.

Post Replacement
When a hinge post is cracked or leaning, bolting a new hinge onto it is a waste of your money. You’ll be back to a sagging gate in a few months. We set and square a new post, tie it into the existing block wall or footing, and rehang the gate so the swing lines up the way it should. In the older west-side neighborhoods, we regularly find posts softened by years of heat and grit that were never properly anchored to begin with.

Rail Repair
Stress cracks show up at rail welds and corners after enough expansion and contraction cycles. A rail that’s split at the weld is a weak point that will keep failing until it’s cut out and re-welded properly. We weld rail repairs on site, in your driveway, so the gate never leaves your property.

Custom Welding
Sometimes a gate needs a reinforcement, a new latch plate, a reinforcement gusset, or a full custom piece to match what’s already there. Our Gate Parts & Welding team welds on site, which means your gate stays in your driveway instead of getting hauled off for a week. We can match wrought-iron and steel work so the repair disappears into the original.
Trusted Brands We Service in Las Vegas
Once the gate metal is sound, the operator often needs attention too. We’re certified to service nine major gate brands, including LiftMaster, FAAC, and Linear, and we diagnose the problem before swapping parts. We don’t claim to stock brand parts locally. If a part needs ordering, we’ll tell you the timeline up front and get you scheduled. The goal is a gate that works, not a parts bill you didn’t ask for. If you’re also shopping for hardware or a full replacement down the road, our Gate Parts & Welding in Las Vegas page lays out the options.
Common Gate Parts & Welding Problems We See in Las Vegas Homes
This is where Las Vegas differs from most of the country. Our gates fail from heat and grit, not rust. Surface temps routinely pass 150°F in summer, and spring winds pack abrasive dust into every moving part. Here’s what we find:
- Seized lift-off hinges. Heat cycling and windblown dust lock these up so the gate drags instead of swinging. Left long enough, the extra strain cracks the hinge post.
- Paint peeling on steel gates. UV and 150°F+ surface heat break down the coating, exposing bare metal to grit abrasion, which speeds up weld fatigue. What looks like cosmetic peeling is usually the start of a structural problem.
- Grit-packed slide gate tracks. Desert dust collects in tracks and rollers, so a slide gate starts to bind and jump. Periodic cleaning buys time, but worn rollers need replacing.
- Heat-fried operator boards. Summer heat dries lubrication and cooks control boards, which leads to rack-and-pinion binding and operator failure even on gates that opened fine in spring.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Las Vegas, NV
Here’s what Las Vegas jobs typically run. A hinge replacement generally lands around $150 – $400 depending on how many hinges and whether the post needs work. Post replacement runs $400 – $900, since setting and squaring a new footing takes time. Rail and stress-crack welding is usually $150 – $350. Custom welding work starts around $200 and goes up with complexity. Gate roller replacement on a slide gate runs $120 – $300.
What moves the price is gate size, how much corrosion or grit damage has to be cut out, and whether the operator also needs attention. Your price is quoted and agreed before any work starts, and that number is the number. We also take $40 off any repair over $200, skip the trip charge inside the county, and offer 10% off for seniors and veterans. Call for a free estimate.
We Also Serve Cities Near Las Vegas
We take gate work throughout Winchester, North Las Vegas, Sunrise Manor, and Paradise, and we know how the housing stock changes block to block. If you’re outside Las Vegas proper, ask when you call and we’ll give you a straight answer on scheduling and trip charge.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Las Vegas
Because heat and windblown grit do the damage, not moisture. Summer surface temps pass 150°F, which cooks lubrication out of the hinges, then spring winds pack abrasive dust into the now-dry joint. Over a few seasons the hinge seizes and the gate starts to drag. Replacing seized hinges with the right spec, and keeping them lubricated, is the fix.
Expect peeling on standard paint because UV and heat here break it down quickly. A proper zinc-rich or galvanized coating over clean steel holds up far better, and it protects the welds too. Bare metal exposed by peeling paint abrades against grit and starts to fail at the joints. Prep matters as much as the coating itself.
Usually a combination of grit-packed tracks, worn rollers, and a rack that’s out of alignment. Desert dust collects in the track and lifts the gate just enough to jump, and once a roller wears down the problem gets worse. Cleaning and replacing rollers, then adjusting the rack, corrects it. Leaving it usually damages the operator next.
Yes. Automatic gate operators are required to have safety edges or sensors that reverse the gate when something is in the path. We check operators against that requirement and flag any missing or failed sensor. Don’t run an automatic gate without them. It’s a real injury risk, not a formality.
Very likely. Summer heat inside an operator housing can cook the control board, especially if the enclosure isn’t shaded or ventilated. It dries lubricant on the rack and pinion too, so the motor works harder right when it’s hottest. We diagnose the board and the mechanical side together, since one often causes the other.
Get a Straight, Upfront Price on Your Las Vegas Gate
If your gate is dragging, cracked at a weld, or stuck open, call (844) 761-8729. A live person answers around the clock, and you’ll get a free estimate with the price quoted before any work starts. Not sure yet if the repair is worth it? Bring us any written estimate and we’ll give you a free second opinion. You can also swing by the shop and look us in the eye. That’s the oldest accountability there is.
Written by the team at Gatewood Fence & Gate.