A Gatewood company - serving Sunrise Manor, NV
Gate Parts & Welding in Whitney, NV | Gatewood Fence & Gate Sunrise Manor - Gatewood Fence & Gate Sunrise Manor

Gate Parts & Welding in Whitney - Fabricated to Fit, Priced Per Job

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Whitney

If your gate has stopped latching, is dragging on a cracked roller, or the operator quit after the last heat wave, we can help. Our Gate Parts & Welding team works on gates across Whitney every week, and we know the 1980s and 1990s subdivisions here block by block, because that’s where the calls come from. We’ll tell you what’s actually wrong before anyone touches a welder, quote a written price, and get it done right. Call (844) 761-8729 and a live person picks up, day or night.

Call (844) 761-8729

Why Gatewood Fence & Gate Sunrise Manor Is Whitney’s Preferred Gate Parts & Welding Company

We’ve built our name in Whitney the slow way: by showing up when we said we would and fixing what we found. Neighbors in the 89122 ZIP pass our number along because the person who answers the phone actually knows the trade and the person who shows up actually carries the tools. Every job carries the 90-Day Done Right Promise in writing, so if something we touched isn’t right, one call brings us back. Our technicians have up to 25 years of experience with everything from a builder-grade hinge that’s been baking since the Reagan years to a modern access keypad.

Whitney sits close to our Sunrise Manor base, so getting a truck out here isn’t a scheduling headache. That matters when a gate is stuck open on a 115°F afternoon and your yard is sitting exposed. We also hand out standing offers that don’t need haggling: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Free second opinions on anyone else’s written estimate, too. Fix the panel without the post and you’ll fix it twice – that’s the thinking behind every job.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Whitney

Hinge Replacement in Whitney

A gate sags in the hinge post, not in the middle, and that’s where we start. In Whitney’s older subdivisions, original builder-grade hinges have carried the same gate for 25 to 35 years of desert heat, and the pins wear until the whole panel drops. We replace the hinge and check the post footing, because a new hinge on a loose post is money thrown at the ground. Typical hinge replacement in Whitney runs $150 to $360 depending on the number of hinges and whether the post needs help.

Hinge Replacement in Whitney

Post Replacement in Whitney

We’re not going to weld a gate to a post that’s already failing. Many of Whitney’s block-wall and wrought-iron setups have posts that were never footed properly for automation, so they lean and twist and the gate drags. We set a new post, tie it to the existing fence line where we can, and hang the gate true. Post replacement here usually lands between $400 and $1,200 based on the post type and how much digging the footing takes.

Post Replacement in Whitney

Rail Repair in Whitney

Rails take the worst of the windblown grit that kicks up off the open desert east of Whitney in the afternoons. That fine dust works into the joints and rollers and grinds the rail edges down, and eventually a drive-side rail cracks or warps. On-site welding lets us repair the rail in your driveway rather than hauling the gate away. Rail repair in Whitney typically costs $250 to $550 depending on the length and material.

Rail Repair in Whitney

Custom Welding in Whitney

Sometimes the right fix is a small weld, not a new gate. A cracked header, a broken picket, a bracket that pulled loose from a block wall – we bring the welder to the gate instead of hauling your steel off and leaving you waiting. Because Whitney’s older gates are often original iron with a history of repairs, we take extra care to match the existing profile and not build a patch that looks like a patch. Custom welding calls usually run $120 to $400 depending on how much has to be built up.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 761-8729

Trusted Brands We Service in Whitney

We service nine major gate brands and know their failure patterns well enough to diagnose fast. In Whitney, that includes older Linear operators common on builder-grade swing gates, Viking slide operators still running on driveways from the 1990s, Ghost Controls during retrofits, and DoorKing access control on any gated entry. We don’t stock parts on a truck, and we won’t pretend a specific part is already in a bin – what we do is identify the right replacement, order it, and get back out to fit it so the gate isn’t sitting half-apart for a week. If your brand isn’t on the list, call anyway; we’ll tell you straight whether we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in Whitney Homes

  • Builder-grade operators that quit in the heat. The control boards and plastic gears on older LiftMaster and Linear units just can’t take Whitney’s 110°F-plus summers and relentless UV. When the controller drops, the gate usually needs more than a new board – we look at the whole system.
  • Manual gates retrofitted with automation, no infrastructure behind it. A later-added operator on a 1989 gate often outpaces the original hinge post and footing, so the gate sags and the hinges get replaced again and again. We reinforce the post so the automation has something solid to push against.
  • No conduit from the original build. Because most of these gates were installed manual, the power run was never planned. That leaves exposed wiring degrading in the heat, causing the operator and safety photocells to cut in and out. Sometimes we trench; sometimes a solar gate opener sidesteps the whole problem.
  • Rollers and hinges seizing with grit, not rust. The dry valley doesn’t rust these parts the way a wet climate would, but the dust from the open desert east of Whitney packs in and jams them solid. Cracked plastic rollers and seized hinges are the most common call we get here.

Pricing for Gate Parts & Welding in Whitney, NV

Here’s what jobs actually run in Whitney’s market. Hinge replacement typically runs $150 to $360. Gate rollers run $90 to $220 depending on count and operator type. Rail repair is usually $250 to $550. Post replacement lands between $400 and $1,200, and custom welding calls run $120 to $400. If your operator also needs work, replacing a heat-failed control board or gear set generally adds $200 to $500 before labor. We quote every price up front and you approve it before anyone starts, so the invoice matches the number you agreed to. Estimates are free, and a second opinion on someone else’s written estimate costs nothing. Call (844) 761-8729 for an exact figure.

We Also Serve Cities Near Whitney

Whitney doesn’t sit in a vacuum, and neither do we. Homeowners reach us from Whitney and the surrounding east-side communities, including Sunrise Manor, Winchester, Paradise, and Las Vegas. If you’re just up the road from us, getting a truck out is easy. Same Promise, same live person on the phone, same written quote before work starts. Call and we’ll tell you when we can come.

Serving Whitney, NV – Our Local Coverage Area

We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Whitney

Why Whitney Chooses Gatewood Fence & Gate Sunrise Manor

We set the standard for gate parts & welding in Whitney.

30-60 Min Response

Fast dispatch across Whitney. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Whitney

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Whitney - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically the same day.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Whitney Customers Say

Trusted by homeowners across Whitney and surrounding areas.

★★★★★

"He builds the gates himself. That is not something you can say about the outfits that just order a panel in."

Doreen Whitfield
★★★★★

"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."

Salvador Arredondo
★★★★★

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

Winston Achterberg

Ready for Gate Parts & Welding in Whitney?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Whitney.

(844) 761-8729

Request a Free Estimate in Whitney

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch