Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Summerlin
Summerlin gates take a beating. Desert heat bakes the finish, monsoon wind packs sand into the rollers, and half the driveway gates out here started life manual before someone bolted an opener onto them. We repair gates across Summerlin, from The Ridges to Red Rock, and we know why these failures happen in this valley and not somewhere else. Call (844) 761-8729 and a live person answers, day or night. We’ll tell you what we think is wrong, what it usually costs, and whether it’s worth a visit.
Why Gatewood Fence & Gate Sunrise Manor Is Summerlin’s Preferred Gate Repair Company
Summerlin is a specific kind of place to work on a gate. The villages are master-planned, the HOA rules are real, and a repair that ignores the approved iron-and-stucco palette can earn you a violation notice and a forced redo. We check village design guidelines before we touch anything, so the fix holds and the paperwork holds with it.
Our technicians have up to 25 years of experience, and every job carries the 90-Day Done Right Promise in writing. It’s stated plainly on the invoice, not buried in the fine print: if it’s not done right, we make it right. We’re licensed, insured, and bonded, and we work with nine major brands so a LiftMaster, Linear, Viking, DoorKing, FAAC, BFT, Ghost Controls, Elite, or Mighty Mule unit doesn’t send us hunting for answers.
Pricing is quoted and agreed before any work starts. Standing offers make it easy: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Summerlin
Automatic Gate Repair
Summerlin automatic gate repair usually starts with an operator that’s starved for power. Many gates here went in manual during the 1990s – 2010s buildout, then got a LiftMaster or Linear opener added later without a dedicated circuit or conduit. That shows up as a gate that nuisance-trips in summer heat or slows to a crawl mid-swing. We check the power source and the UL 325 safety photocell and loop detector before we blame the motor.

Electric Gate Repair
An electric gate that stops answering the keypad in Summerlin is often a wiring or control-board issue, not a dead motor. Blowing sand finds its way into operator housings and control boxes, and dust on a photo eye will stop a gate cold. We trace the circuit, clean the hardware, and repair what’s actually failing rather than swapping the whole operator. If the board is shot, we’ll say so and show you why.

Hinge & Post Repair
In Summerlin, a gate sags in the hinge post, not in the middle, and that’s where we start. Desert soil shifts and settles under the post footing, and monsoon winds add leverage on top of it. Fix the panel without the post and you’ll fix it twice. We do on-site welding so the gate stays in your driveway while we shore up the post and rebuild the hinge, which keeps the fix honest.

Gate Realignment
Realignment is what a gate needs after a wind event or a slow sag finally jumps the track. Blown sand abrades rollers and track hardware, and UV-driven bake-out dries out wood components until the gate stops tracking true. We realign the gate to the post and the track, check the operator’s travel limits against the new position, and confirm the gate closes clean on its own before we call it done.
Those four cover most of what we see in Summerlin, and our Gate Repair team handles the rest, from lock repair to weld and rust work.
Trusted Brands We Service in Summerlin
We’re certified to service nine major gate brands, and in Summerlin the ones that come up most are Linear, Viking, and DoorKing. Linear operators show up on plenty of retrofitted driveways. Viking holds up on community and pool gates where the HOA owns the hardware. DoorKing handles a lot of the access control on shared gates. We don’t stock parts, so we order what the job needs and get back to you with a real timeline instead of a guess. If you’re not sure what’s on your gate, read us the label and we’ll tell you.
Common Gate Repair Problems We See in Summerlin Homes
- Builder-grade operators bolted onto manual gates. The opener was added after the fact, so there’s no dedicated conduit or power run feeding it. In Summerlin heat, that operator runs hot and nuisance-trips, and the fix is usually in the wiring, not the motor.
- Hinge post loosening in desert soil. Footings settle and shift, and monsoon winds work the post a little more each season. The gate starts dragging on one side and the owner assumes the operator is tired.
- Finish and lubricant bake-out. Intense UV and low humidity dry out wood panels, crack the finish, and turn lubricant to gum. Blowing sand then grinds through hinges and packs into rollers until the gate won’t travel.
- HOA palette mismatch. A replacement wrought-iron panel or decorative gate that doesn’t match the village’s approved iron-and-stucco standard gets flagged. On shared community gates, altering hardware without HOA sign-off is the other trap.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Summerlin, NV
Here’s what gate work runs in Summerlin. A hinge and post repair typically lands between $250 and $550, depending on whether the footing needs reworking. Automatic and electric gate repair runs $180 to $450 for most operator, sensor, and control-board fixes. Realignment and roller or track work usually comes in at $150 to $350. Welding on wrought iron or stucco-adjacent panels is $120 to $300 for a typical repair. Those ranges reflect this market, and the price is quoted and agreed before any work starts, so the invoice matches the number you were given. Estimates are free, and we’ll give you a second opinion on any written estimate at no charge.
We Also Serve Cities Near Summerlin
Summerlin sits close to a lot of the valley, and we handle gate work in Spring Valley, Las Vegas, Winchester, and Paradise too. If you’re just outside the village line, call anyway. We’ll tell you straight whether it’s a job for us. You can also read more about Gate Repair in Summerlin and the surrounding area on our city page.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Summerlin
No, not safely, and not for long. A manual swing gate was never engineered for automation, so the post footing, conduit, and dedicated power usually aren’t there. Bolting an opener on works for a while, then the operator starves for power and nuisance-trips in summer heat. A proper retrofit means checking the post, running dedicated power in conduit, and fitting UL 325 safety edges and photo eyes before the operator goes on. Call (844) 761-8729 and we’ll walk you through what your gate actually needs. We’ll schedule a free measure and put the price in writing.
Yes, on anything visible or shared. Repairs and replacements that change a gate’s look, finish, or hardware can trip village design guidelines, so the fix has to match the approved iron-and-stucco palette. On community or pool gates, altering shared-access hardware without HOA sign-off is the other common violation. We check the guidelines before we swing a wrench so your repair doesn’t come back as a notice. Call (844) 761-8729 and we’ll sort out what needs approval first.
The two usual causes are undersized power to the operator and a dusty photo eye or loop detector. Sand and heat both do their part. A gate that reverses mid-swing is often doing exactly what its UL 325 entrapment protection is designed to do, which means something is blocking the sensor or the sensor is failing. It’s a safety system, not a glitch, and it should be checked by a trained pro rather than bypassed. Call (844) 761-8729 for an exact quote.
The hinge post. A gate sags at the post, not in the middle, because desert soil shifts under the footing and monsoon winds work it loose over time. Replacing hinges without addressing the post just buys you the same repair next season. We check the post and footing first, do on-site welding so the gate stays put, and realign after. Call (844) 761-8729 and we’ll tell you what a fix runs in Summerlin.
Nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the Linear and DoorKing units common on Summerlin driveways and shared community gates, and the Viking operators on a lot of pool and recreation gates. If your label says something else, read it to us and we’ll tell you whether we can help. Call (844) 761-8729 for a free estimate.
Get Your Summerlin Gate Fixed
If your gate is dragging, reversing, or ignoring the keypad, the sooner it’s looked at the cheaper it usually is. We’ll quote the price up front, put it in writing before any work starts, and stand behind it with the 90-Day Done Right Promise. Call (844) 761-8729 for a free estimate, and someone will pick up.
Written by the team at Gatewood Fence & Gate Sunrise Manor.