Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterGate Access Control Near You in Sunrise Manor, NV
If you’re searching for gate access control near you in Sunrise Manor, we can help. We’re Gatewood Fence & Gate, a locally owned, owner-operated gate shop, and we service, repair, and install access control systems for homes and small properties across the east Las Vegas Valley. When a keypad stops reading codes or a remote won’t open the gate, one call gets you a live person and a real appointment window. Reach us at (844) 761-8729.
Most callers we hear from in Sunrise Manor want the same thing: somebody who answers the phone, shows up when they said they would, and fixes the gate instead of selling them a new one. That’s the whole job description here. We answer every call with a live person around the clock, we publish our address and license number so you can look us up, and every job carries our 90-Day Done Right Promise in writing. Hal’s name is on the shop and on every invoice. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
We serve homeowners and property managers throughout Sunrise Manor, including the neighborhoods around Lamb Boulevard, Nellis Boulevard, and the older tracts off Sahara and Charleston. If your gate is on the west side of the valley, we get out there too. Wherever you are, you’ll get a straight answer about timing and cost before anyone touches your gate.
Fast, Local Gate Access Control
Access control is the part of your gate that decides who gets in. Keypads, card readers, vehicle remotes, intercoms, exit sensors, and the control board that ties them together. When one piece takes a shot, the gate either stops opening, opens for everybody, or worse, opens on its own. We diagnose that whole chain in a single visit, usually the same day you call if we can get out there, and we weld and repair on site so the gate stays in your driveway where it belongs.
Our technicians have up to 25 years of experience, and we’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Sunrise Manor, where we see a lot of older LiftMaster and Linear boards in the same afternoon as newer DoorKing keypads on newer gates. If you already have a system and you’re trying to remember which one, we can work it out from a photo or a quick look at the control box.
What we won’t do is quote you one price on the phone and a different one at the door. Upfront pricing is the whole promise. No haggling, no surprise line items. Standing offers are simple and permanent: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. That second opinion is worth knowing about if another shop has already handed you a quote to replace a board. Fix the panel without the post and you’ll fix it twice. Same goes for a board swap when the real problem is a bad sensor or corroded terminal.
And we mean it when we say we answer around the clock. A gate that won’t close at 11 p.m. leaves your property open all night. A gate that won’t open in the morning can strand your car in the driveway. Call and a live person picks up, not voicemail and not a call center three states away.
What we look at on a first visit
Most access control failures fall into a handful of patterns. Here’s what a first visit typically covers:
- The keypad and reader. We check whether the unit is getting power, whether the wiring is intact, and whether the codes or cards still live on the controller.
- The control board. We look for fried relays, corrosion, and loose terminals, especially in the older boxes we come across in Sunrise Manor.
- The safety sensors and loops. Photo eyes and exit loops are the usual suspects when a gate opens for no reason or refuses to close.
- The operator and gate hardware. A board that keeps tripping is often a gate that’s dragging in the hinge post. A gate sags in the hinge post, not in the middle, and that’s where we start.
- Your remotes and codes. If a remote stopped working or a code was lost, we reprogram and reissue without making you buy a whole new system.
Areas We Cover
We work out of Sunrise Manor and cover the surrounding east valley and beyond: Whitney, Winchester, North Las Vegas, Paradise, Henderson, Las Vegas, and Spring Valley. If you’re in Whitney, we’re minutes away. If you’re in Henderson or Spring Valley, we still make the trip and likely in the same window we’d give a neighbor. Not sure whether you’re in the range? Ask when you call, and you’ll get a yes or no, not a maybe.
If you want a closer look at what we do on this service, see our Gate Access Control in Sunrise Manor page. If you’d like a broader look at the shop and how we work, start at the home page.
FAQs
How fast can you get to my gate in Sunrise Manor?
Usually the same day if you call in the morning, and next day at the latest for non-emergencies. Because we’re based in Sunrise Manor and work the surrounding east valley, we can often fit a call in on the same route. A live person takes your call around the clock, so if you’re calling at 2 a.m., you still get an answer and a slot. Call (844) 761-8729 and we’ll give you a real window.
Do you serve my area?
Most likely yes. We cover Sunrise Manor and the neighborhoods around it, plus Whitney, Winchester, North Las Vegas, Paradise, Henderson, Las Vegas, and Spring Valley. If you’re on the edge of that list, call and ask. We’ll tell you straight whether we can get out to you. There’s no trip charge inside the county.
How much does gate access control repair cost in Sunrise Manor?
Most access control repairs run $150 to $450 depending on what’s failing. A keypad swap or remote reprogramming sits near the low end. A control board replacement or sensor and wiring repair pushes toward the top. A full access control system on a new gate runs higher, and we’ll give you a written estimate before we start. Estimates are free, and there’s a free second opinion on any written estimate you’ve already got from another shop. $40 off any repair over $200, and 10% off for seniors and veterans. Call (844) 761-8729 for an exact quote.
Can you help after hours or on weekends?
Yes. A live person answers every call, 24 hours a day, seven days a week. That includes weekends and holidays, when a gate that won’t close is the worst kind of problem. If your gate is stuck open and you need someone out tonight, call and we’ll tell you honestly whether we can make it. If it can wait until morning, we’ll say so and lock in an early slot.
How our access control work holds up
Access control has a way of going wrong quietly. A keypad that works for months and then starts rejecting the same code. A remote that opens the gate at 8 a.m. and not at 6 p.m. Those are usually sensor drift, a loose terminal, or a control board on the way out. We chase the actual fault instead of swapping parts and hoping. That’s why we offer the 90-Day Done Right Promise in writing on every job. If the fix doesn’t hold, one call brings us back. No runaround, no invoice renegotiation.
If the gate itself is also sagging, sticking, or dragging, we’ll flag that in the same visit. Access control and gate hardware work together. The best board in the valley can’t fix a hinge post that’s pulled loose from the ground. We do on-site welding and true repair, so if there’s a fix in your driveway, that’s where it happens. If replacement is genuinely the right call, we’ll say so plainly and give you a written number.
We’re neither the biggest gate outfit in Las Vegas nor the cheapest, and we’re honest about that. What we are is a locally owned, owner-operated shop with a published address and a license anyone can look up. The person who quotes your job is the person who stands behind it. You’ll probably see us again at the hardware store, and that’s fine by us.
Call (844) 761-8729 for a free estimate on gate access control in Sunrise Manor. You’ll get a live person, a real window, and a straight price. If it’s a repair, we’ll tell you. If it’s a replacement, we’ll tell you that too.
Written by the team at Gatewood Fence & Gate Sunrise Manor, serving Sunrise Manor and nearby areas.
What Our Customers Say
"He builds the gates himself. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg