Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Sunrise Manor?
Most gate repairs in Sunrise Manor run $180 to $500, with simple fixes like a bent hinge or a misaligned latch landing near $180-$250 and heavier work like welding a broken post or replacing a gate operator motor climbing to $450-$900. A brand-new gate repair call never starts with a blank check. We give you a number before we touch anything, and that number is the number you pay. If you’ve gotten a quote that changed at the door somewhere else, you already know why that matters.
For the full context on how we approach repairs across the east valley, see our Gate Repair in Sunrise Manor page, and for the wider picture of who we are, start at our home.
Gate Repair Cost Breakdown (2026)
Here’s what the work actually runs in Sunrise Manor this year. These are real ranges for the east Las Vegas valley market, not national averages pulled off a franchise blog. Your gate, your hardware, and how it’s mounted all shift the number, but you can plan around this table.
| Repair Type | Typical Price Range | What’s Included |
|---|---|---|
| Hinge repair or replacement | $180 – $280 | New hinge set, realignment, on-site welding where needed |
| Latch and alignment | $150 – $250 | Latch adjustment or replacement, gate swing correction |
| Sagging gate / hinge post repair | $250 – $550 | Post reinforcement, welding, re-hang |
| On-site welding repair | $200 – $500 | Frame or joint welding, stays in your driveway |
| Gate operator / motor repair | $250 – $600 | Diagnostics, board or component repair, calibration |
| Gate operator / motor replacement | $550 – $1,400 | New unit, mounting, wiring, travel limits set |
| Access control / keypad repair | $200 – $550 | Keypad, receiver, or entry device service |
| Full gate replacement (single) | $1,800 – $4,500 | New gate, hardware, hang, finish |
The single biggest driver of cost is whether the post is involved. A gate sags in the hinge post, not in the middle, and that is where we start. Fix the panel without the post and you’ll fix it twice. That’s why a $180 hinge job sometimes turns into a $400 post job once we get eyes on it. We tell you that before we start, not after. A straightforward latch tweak stays cheap. A post that’s been leaning since a monsoon two summers ago takes welding and more time.
Operator work is the other big swing. A board repair on a LiftMaster or FAAC unit is a fraction of a full motor swap, and we’re certified on nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because it means we can often repair the motor you already own instead of selling you a new one.
What Affects Gate Repair Pricing in Sunrise Manor
- Post condition and soil. Sunrise Manor sits on ground that shifts with our heat-and-dry cycles, and a hinge post that’s been in the dirt for fifteen years may have moved. If the post needs welding or reinforcing, expect the range to climb toward $550.
- Gate material and weight. A light ornamental aluminum gate hangs differently than a heavy wrought-iron or steel tube gate. Heavier gates put more load on hinges and operators, and repairs take longer.
- Operator brand and age. We’re certified across nine major brands, so older DoorKing and Elite units aren’t a dead end. But a discontinued control board can cost more than a common one, and that shows up in the quote.
- Whether it’s a repair or a replacement. Most companies lead with replacement. We don’t. On-site welding and a repair-first approach keep your gate where it belongs and usually save you real money.
- Access and placement. A gate tucked behind a tight side yard or over a slope takes more setup. We’re honest when that adds time.
- Travel inside the county. There’s no trip charge inside the county. That’s a standing offer, not a special.
How to Save on Gate Repair
You don’t have to haggle here. Our standing offers are on the table from the first call, and they work with the price you’re quoted, not against it.
- Get a second opinion, free. If another company handed you a written estimate, bring it to us. We’ll look at it free of charge and tell you plainly whether the work is needed. Sometimes it is. Sometimes it isn’t, and you’ll hear that too.
- Use the $40 off. Any repair over $200 takes $40 off. No code, no coupon, no fine print.
- Seniors and veterans get 10% off, always. That’s permanent, not a seasonal promo.
- Repair the motor before you replace it. A board repair or calibration is often a fraction of a new operator. Ask us to look at the existing unit first.
- Fix it before the post goes. Catching a sagging hinge early is a $200-ish job. Waiting until the post fails can double it.
- Bundle the small stuff. Latch and hinge work done in one visit costs less than two separate trips.
We give free estimates across Sunrise Manor. Call (844) 761-8729 and you’ll get a live person, not a voicemail, not a call center three states away. Show me the gate closing on its own and I’ll show you where it’s failing.
How Does the Repair Process Work? (Step by Step)
- You call and talk to a person. A live person answers every call, 24 hours a day, seven days a week. We ask what the gate is doing and set a window that we intend to keep.
- We show up in the window. Background-checked, uniformed technicians arrive on the job. No rescheduled “somewhere between Tuesday and Thursday.”
- We diagnose the real problem. A gate sags in the hinge post, not in the middle, and that’s where we start. We check the post, the hinges, the frame, and the operator before quoting.
- You get an upfront price. You get a clear number before we start, and it doesn’t change at the door. No-hassle pricing is the whole point.
- We repair on site. On-site welding means the gate stays in your driveway. We fix panels, posts, and hardware rather than hauling your gate off or swapping parts that don’t need swapping.
- You get the 90-Day Done Right Promise in writing. Stamped on every job. If it’s not done right, we make it right. One call brings us back, no runaround.
Why Pricing Changes Between Companies in Sunrise Manor
A lot of gate quotes in Sunrise Manor are built to be replaced, not repaired. National outfits that quote one price on the phone and charge another at the door aren’t pricing repair work at all; they’re pricing a replacement sale. The number they give you on the phone is a hook. The number at your door is the real one, and by then you’ve already cleared your afternoon.
We price differently because the business is different. Gatewood Fence & Gate is locally owned and owner-operated. The name is on the shop, the address is published, and the license number is there for anyone to look up. A gate sags in the hinge post, and the shop is down the road, and that’s the oldest accountability there is. When the quote is real and the person quoting it is the person who shows up, the price doesn’t move.
When Repair Beats Replacement
Most of the time, repair wins. A bent hinge, a wandering latch, a frame that needs welding, a motor that needs a board, a keypad that’s gone flaky – all of these are repair jobs, and repairing them costs a fraction of a replacement. A single-gate replacement in Sunrise Manor runs $1,800 to $4,500. A hinge and alignment repair runs $150 to $280. Those numbers aren’t close.
Replacement makes sense when the gate is structurally gone, when the operator is discontinued beyond a reasonable part, or when the whole assembly has been patched so many times it fails every season. Even then, we’ll tell you plainly and we’ll show you why. Free second opinions on any written estimate are a standing offer, so if someone hands you a replacement quote, bring it to us before you sign.
Common Gate Problems in Sunrise Manor and What They Cost
- Gate sags or drags. Post and hinge issue. $250 – $550.
- Gate won’t latch. Alignment or latch wear. $150 – $250.
- Operator won’t open or close. Board, limit, or wiring issue. $250 – $600 for repair.
- Keypad or remote stopped working. Access control service. $200 – $550.
- Frame or joint cracked. On-site welding. $200 – $500.
- Motor runs but gate doesn’t move. Drive or hardware failure. Often a repair, sometimes a motor job.
For a closer look at each of these repairs, our Gate Repair in Sunrise Manor page walks through the full scope of what we fix and how we diagnose it.
Why Choose Us for Gate Repair in Sunrise Manor?
- $40 off any repair over $200 – standing, no haggling.
- No trip charge inside the county.
- Free second opinion on any written estimate.
- Permanent 10% discount for seniors and veterans.
- 90-Day Done Right Promise in writing on every job.
- Live person answers every call, 24 hours a day, 7 days a week.
- Background-checked, uniformed technicians.
- Certified on nine major gate brands.
- On-site welding – your gate stays in your driveway.
- Upfront pricing that doesn’t change at the door.
Our technicians have up to 25 years of experience on gates and operators, and the repair-first approach means we fix what’s there before we talk about swapping it out. Hal’s name is on the shop and on every invoice. You can drive to the shop and look at it yourself.
FAQs – Gate Repair Cost in Sunrise Manor
How much does gate repair cost in Sunrise Manor?
Most gate repairs in Sunrise Manor cost $180 to $500, with hinge, latch, and alignment work at the low end and post repair, welding, or motor service at the high end. Full operator replacement can run $550 to $1,400. Call (844) 761-8729 for an exact quote – estimates are free.
Is it cheaper to repair or replace a gate in Sunrise Manor?
Repair is almost always cheaper. A hinge or alignment fix runs $150 to $280, while a full single-gate replacement runs $1,800 to $4,500. We only recommend replacement when the gate is structurally beyond repair or an operator is discontinued beyond a reasonable part. Call (844) 761-8729 and we’ll tell you honestly which way to go.
How much does gate motor repair cost in Sunrise Manor?
Gate motor repair in Sunrise Manor typically runs $250 to $600, and full motor replacement runs $550 to $1,400. We’re certified across nine major brands, so many older units can be repaired rather than replaced. Call (844) 761-8729 for a free estimate on your specific motor.
Can you fix a sagging gate without replacing the post?
Sometimes yes, sometimes no. If the hinge post is solid and only the hinge or the panel has moved, we can realign and repair without a new post. If the post has shifted or rotted, it needs reinforcement, and that’s a $250 to $550 job. Call (844) 761-8729 and we’ll give you a straight answer after looking at it.
Do you charge a trip fee in Sunrise Manor?
No. There’s no trip charge inside the county. If you’re in Sunrise Manor, that saves you $40 or more compared to companies that bill out-of-area fees. Combine that with $40 off any repair over $200 and a permanent 10% discount for seniors and veterans, and the number you’re quoted is the number you pay. Call (844) 761-8729 to schedule.
Get an Upfront Price Today
Gate repair in Sunrise Manor doesn’t need to be a mystery number. We give you a range before we start, we honor it, and we back the work with the 90-Day Done Right Promise in writing. Our technicians have up to 25 years of experience, we weld on site so your gate stays in your driveway, and a live person answers the phone 24 hours a day. If another company has quoted you, bring it in for a free second opinion. Honest pricing. Real repairs. A name on the shop you can verify.
Call (844) 761-8729 for a free estimate in Sunrise Manor today. No haggling, no surprises, no voicemail.
Pricing reflects the Sunrise Manor market as of 2026. Gatewood Fence & Gate Sunrise Manor offers free estimates – call (844) 761-8729.
What Our Customers Say
"He builds the gates himself. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg