A Gatewood company - serving Sunrise Manor, NV
Gatewood Fence & Gate Sunrise Manor gate repair team

Gate Installation Cost in Sunrise Manor - Real Local Prices, Then a Free Site Survey

Real local price ranges for the work, then a free site survey and a written quote for your driveway. Groundworks, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Installation Cost in Sunrise Manor?

Gate installation in Sunrise Manor typically runs $2,200 to $6,400, with most residential driveway gates landing around $3,400 installed. A basic walk gate with a wood or chain link frame starts closer to $1,400 to $2,100, while a wide automated driveway gate with an opener can push past $8,000. The number that matters at your address depends on width, material, and whether the ground under it is ready to hold a post that won’t lean in two summers.

We quote upfront and we don’t change the number at the door. Call (844) 761-8729 for a free estimate, and you’ll get a real range before anyone touches a shovel.

Key Takeaways

  • Typical Sunrise Manor residential gate install: $2,200 to $6,400.
  • Automated driveway gates add $900 to $2,600 for opener and controls.
  • Block wall and masonry columns raise the total by $600 to $1,800 per side.
  • Permits through Clark County add roughly $150 to $450 depending on height and automation.
  • Every install carries the 90-Day Done Right Promise in writing.

Gate Installation Cost Breakdown (2026)

Here’s what the line items actually look like for a Sunrise Manor job. These are real ranges pulled from residential work in the neighborhood, not national averages off a contractor website.

Line Item Typical Range Notes
Walk gate (3-4 ft, chain link or wood) $1,400 – $2,100 Includes posts, hinges, latch
Single swing driveway gate (10-14 ft) $2,400 – $4,200 Material and finish drive the spread
Double swing driveway gate (16-24 ft) $3,800 – $6,400 Two hinge posts, center latch or drop rod
Sliding gate (steel or aluminum, 12-20 ft) $3,200 – $7,200 Needs flat run and roller track
Wrought iron or ornamental steel $4,000 – $9,500 Custom fabrication, welded on site
Masonry columns (each) $600 – $1,800 Block and stucco to match the wall
Gate opener, residential swing or slide $900 – $2,600 Includes controls, safety sensors, one remote
Keypad, intercom, or access control $250 – $900 Depends on the system
Concrete footings and post setting $300 – $800 Caliche ground can push this higher
Clark County permit $150 – $450 Height and automation affect the fee
Old gate removal and haul-off $100 – $350 Sometimes waived if we weld on site

What pushes a Sunrise Manor install toward the top of those ranges? Wide openings, harder materials, and anything remote. A 20-foot wrought iron double gate with an opener and a keypad is a different job than a 4-foot walk gate, and the price reflects it. What pulls it toward the bottom? A small opening, an existing sound post we can reuse, and a simple manual swing.

If you already know what you want, our Gate Installation in Sunrise Manor page covers the build process step by step. If you’re still weighing your options, keep reading.

What Affects Gate Installation Pricing in Sunrise Manor

  • Material. Chain link is the cheapest, wood sits in the middle, and wrought iron or ornamental steel runs highest because of fabrication and welding time. A finished aluminum gate with a powder coat costs less to maintain but more upfront than bare steel.
  • Width and weight. Anything over 12 feet needs heavier hinge posts, heavier hardware, and often automation just to open it comfortably. Weight also decides whether the gate will sag in five years or fifteen.
  • The ground under the posts. Sunrise Manor sits on a lot of caliche and hard-packed desert soil. Digging a proper footing sometimes means breaking through that layer, which adds labor. We’d rather charge for it upfront than cut corners and hand you a leaning gate in a year.
  • Automation. A gate opener is its own install with its own controls, safety sensors, and code requirements. If you want a keypad or intercom, that’s a separate line. Our gate motor and opener service covers the repair side if your existing opener is the problem.
  • Masonry and wall tie-in. If your gate has to meet a block wall or stucco column, the mason work gets priced in. Matching Sunburst, Adobe, or the surrounding streets’ existing stucco color takes a little extra time to get right.
  • Permits and inspection. Clark County requires permits for most gates over a certain height and for anything automated. The fee itself is modest, but skipping the permit can cost you later if you sell the house. We pull permits where they’re needed.

One more local wrinkle: wind. We get spring gusts through the east valley that will find a cheap, underbuilt gate and rip the hinges out of the post. That’s not a hypothetical. It’s a weekly call in March and April. Building the hinge post and hardware for wind load isn’t upselling, it’s the difference between a gate that lasts and a gate we’re back out to fix every year.

How to Save on Gate Installation in Sunrise Manor

You don’t have to buy the most expensive gate on the block to get one that works. Here’s what actually saves money without cutting into what matters.

  1. Reuse the existing posts if they’re sound. If your concrete posts are solid and plumb, we can often hang a new gate on them and skip the footing cost. Photos of the posts help us quote this accurately before we come out.
  2. Go manual if you can live without automation. A manual swing gate saves $900 or more. Plenty of Sunrise Manor homeowners keep it simple for side yard access and only automate the main driveway.
  3. Match your finish to the neighborhood. Stucco columns and a wood or steel frame painted to blend with your house costs less than custom ornamental design and looks at home on Sunburst or in the neighborhoods around Hollywood Boulevard.
  4. Ask for the free second opinion. If another company handed you a written estimate for a full replacement, bring it to us. We’ll look at the gate and tell you honestly whether replacement is the right call. Often it isn’t. Our gate repair service frequently fixes what a replacement quote would have covered.
  5. Take the standing discounts. We give $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. These aren’t haggling discounts. They’re standing offers, and they’re yours.

Call (844) 761-8729 for the free estimate. The phone rings a live person, day or night.

Should You Repair or Replace Your Gate in Sunrise Manor?

Repair usually costs $180 to $650. Replacement costs $1,400 and up. That gap is wide enough that we always start by looking at what’s actually broken.

Here’s the test we run in your driveway. A gate that sags isn’t a gate problem, it’s a hinge post problem. If the post is solid, the hinge plates are usually what failed, and re-welding them on site brings the gate back for a fraction of a new one. If the frame is bent, the pickets are rotted, or the posts are pulling out of caliche, that’s when replacement makes sense. Rain rot on wood, rust-through on thin steel, and hardware that won’t hold torque are the usual culprits.

We do welding on site. That matters because it means your gate doesn’t leave your driveway. If you’re getting quotes that all say “replace,” get a second opinion first. It’s free, and it’s the cheapest thing you’ll do all season.

FAQs – Gate Installation Cost

Can you install a gate in Sunrise Manor for under $2,000?

Yes. A walk gate or a smaller single swing gate frequently comes in between $1,400 and $1,900, including posts, hardware, and permit if one is required. Under that means either a narrower opening or reusing a sound existing post. Call (844) 761-8729 and we’ll tell you which side you’re on.

How long does gate installation take?

Most residential installs take one to two days on site, plus lead time for fabrication if it’s a custom gate. A simple walk gate can go in the same day. A double driveway gate with masonry columns and an opener usually runs two full days. We’ll tell you a real window when we quote, and we show up in it.

Do I need a permit to install a gate in Sunrise Manor?

Clark County requires a permit for most gates above 6 feet and for any automated gate. Fees run roughly $150 to $450 depending on height and whether there’s an opener. Skip the permit and you can end up paying to have it corrected at resale. We handle the permit where it’s required.

Is a gate opener worth the extra cost?

If the gate is your main driveway access, yes. An opener adds $900 to $2,600 installed, and it will pay for itself in convenience within the first year for most households. If the gate is side-yard access you use a few times a week, a manual swing saves the money and the maintenance. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers, so whatever you pick, we can keep it running.

Can you fix my existing gate instead of installing a new one?

Often, yes. Spring failures, hinge welds, latches, and automation issues are common same-week fixes in Sunrise Manor, and most repair calls land between $180 and $650. If your current gate is fundamentally sound, we’ll tell you that and skip the installation quote. If it’s not, we’ll show you why. Call (844) 761-8729 for the free second opinion or drop by the shop. The address is published, and we’ll look you in the eye.

Why Gatewood Fence & Gate for Your Sunrise Manor Install

We’re owner-operated. The name is on the shop, the license number is published, and you can drive here and look us in the eye if that matters to you. Every job gets a written 90-Day Done Right Promise. If something’s not right, one call brings us back, no runaround.

Our technicians bring up to 25 years of experience, and we’re certified to service nine major gate brands. We weld on site so your gate stays where it belongs. We answer the phone with a live person 24 hours a day, not a voicemail. And when we quote a price, that’s the price. No changing the number at the door.

Seniors and veterans always get the permanent 10% discount, and nobody has to ask for it twice. No trip charge inside the county. Free second opinion on any written estimate you’ve already got.

For a free estimate, call (844) 761-8729. We’ll give you a real range, tell you if a repair would do the job, and show up when we said we would. You can also start with our home page to see the full range of what we do.

Related Services and Nearby Communities

If you’re a few months out from a new gate, we can help with the parts and weld work in the meantime. Our gate parts and welding service covers on-site repairs, and our gate access control service handles keypads, intercoms, and entry systems for driveways that need them.

We also serve nearby neighborhoods, and the pricing guidance on those pages runs close to what you’ll see here. If you’re just down the road in North Las Vegas or over in Henderson, the local conditions are similar enough that our quote ranges overlap. For communities closer to the east valley, take a look at Spring Valley, Enterprise, and Paradise.

If you’re weighing whether to fix what you have, our gate repair in North Las Vegas page explains how the diagnosis works. Automation questions are covered on our gate motor and opener repair in Henderson page. Access control systems for shared driveways and HOA entrances get a fuller treatment on our gate access control in North Las Vegas page.

Small towns, exurbs, and rural counties are where we do most of our work, and the pricing in Sunrise Manor reflects that. No city markups, no dispatch fees, no call-center surcharge.

Pricing reflects the Sunrise Manor market as of 2026. Gatewood Fence & Gate Sunrise Manor offers free estimates – call (844) 761-8729.

Written by the team at Gatewood Fence & Gate.

What Our Customers Say

★★★★★ 4.8 from 6+ reviews

"He builds the gates himself. That is not something you can say about the outfits that just order a panel in."

- Doreen Whitfield

"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."

- Salvador Arredondo

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

- Winston Achterberg
Need Gate Repair help in Sunrise Manor? Licensed & insured · same-day response · free estimates
Call (844) 761-8729

Request a Free Estimate

Tell us what's going on in Sunrise Manor. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch