A Gatewood company - serving Sunrise Manor, NV
Gatewood Fence & Gate Sunrise Manor gate repair team

Gate Motor & Opener Cost in Sunrise Manor - Real Local Prices, Then a Free Site Survey

Real local price ranges for the work, then a free site survey and a written quote for your driveway. Groundworks, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Motor & Opener Cost in Sunrise Manor?

Gate motor and opener work in Sunrise Manor typically runs $185 to $340 for a repair and $850 to $2,400 for a full replacement with a new opener, hardware and installation included. Swapping a control board or a limit switch usually lands at the low end. Full automation of a manual swing or sliding gate sits at the top. We quote the number before anyone touches the gate, and that number is the number.

Key Takeaways

  • Most opener repairs in Sunrise Manor fall between $185 and $340.
  • A new residential swing or slide opener installed runs $850 to $2,400.
  • Replacements cost more on wide gates, brick columns, and long driveway runs.
  • Free estimates, no trip charge inside the county, and $40 off any repair over $200.
  • 10% off for seniors and veterans, every time, no expiration.

We’re Gatewood Fence & Gate, and our technicians have up to 25 years of experience on exactly this kind of work. A live person answers the phone 24 hours a day, seven days a week. That matters when a sliding gate is stuck half-open at 10 p.m. and the house is sitting wide to the street.

Gate Motor & Opener Cost Breakdown (2026)

Here is what work actually runs in the Sunrise Manor market right now. These are ranges, not bait prices, and the final quote depends on the gate in front of us. Call us and we’ll give you the exact figure before we start.

Job Typical Cost Range What It Covers
Diagnostic service call $0 inside the county No trip charge. We show up, we look, we tell you what’s wrong.
Limit switch / safety sensor repair $185 – $260 Opener reversing or stalling on its own. Sensors, wiring, adjustment.
Control board replacement $240 – $340 Board part and labor. Common on LiftMaster and Linear units 8+ years old.
Battery backup replacement $190 – $290 New cell and install. Keeps the gate working through a brownout.
Arm opener repair (swing) $220 – $390 Arms, brackets, and pivot hardware on single swing gates.
New single swing opener, installed $850 – $1,500 LiftMaster, FAAC, or similar unit, brackets, wiring, testing.
New single slide opener, installed $950 – $1,700 Sliding-rack opener with chain and hardware.
Dual swing opener, both leaves $1,600 – $2,400 Two motors, sync board, safety loop, full install.
Keypad and entry pedestal $280 – $650 DoorKing or similar, plus wiring to the control box.
Vehicle loop detector $320 – $640 Buried safety loop and detector, so the gate won’t close on a car.

What pushes a number up? A wide gate is heavy, and heavy gates need bigger motors. Brick or stone columns mean we’re anchoring into masonry instead of a wood or steel post. Long driveway runs add wire, conduit, and trenching. And if a gate has been running on a dying motor for a year, the hinge hardware has usually taken a beating too. That’s where the repair-first approach matters: we look at the whole gate before we tell you to buy anything. Pull up our Gate Motor & Opener in Sunrise Manor page if you want the full picture of what we service.

What Affects Gate Motor & Opener Pricing in Sunrise Manor

  • Gate weight and width. A 12-foot slide gate and a 20-foot slide gate take different motors. Getting the size wrong is the number-one reason openers die early here.
  • Post condition. A gate sags in the hinge post, not in the middle. If the post is loose or rotted, no motor on earth will fix that. We check the post first because there’s no point bolting a new opener to a post that’s giving way.
  • Power at the gate. Most Sunrise Manor gates sit far from the house. If there’s no buried line, we talk about conduit, a low-voltage run, or a solar option (Ghost Controls and Mighty Mule make good ones for that).
  • Brand and part availability. We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means we know which parts are stocked and which need ordering.
  • Desert heat and dust. Motors and control boards take a beating in a Sunrise Manor summer. The heat ages lubricant and capacitors fast, and dust gets into every gear. We see more board failures in July and August than any other month.
  • Safety hardware. Any opener on a residential gate needs to reverse on contact and stop on an obstruction. If a customer’s been running without that, we add it back. It’s not optional, and it’s part of what we quote.

How to Save on Gate Motor & Opener Work

There are real ways to keep the number down without cutting corners.

  1. Get the free second opinion. If a company has handed you a written estimate, we’ll look at it and tell you straight whether it’s fair. That’s free, and it has saved plenty of customers from a full replacement they didn’t need.
  2. Repair before you replace. A control board on a 10-year-old LiftMaster is a $240 to $340 job. A whole new opener is $850 or more. We’ll tell you which one you actually need.
  3. Take the $40 off. Any repair over $200, every time, no haggling at the counter required.
  4. Seniors and veterans, 10% off, permanently. Not a holiday promotion. It’s on the invoice every time.
  5. Fix small things early. A limit switch that’s drifting or a sensor that’s fogged over is a $185 repair today. Left alone, that’s a burnt motor and a $1,500 install next spring.

Call (844) 761-8729 and we’ll give you a straight number on the phone. No pressure, no bait.

What Does a Gate Opener Normally Include?

A residential opener install normally includes the motor unit, the mounting brackets, wiring to the control box, a keypad or remote, and the safety reversing setup. If the gate needs a new chain or rack, that’s added. If the gate’s been sitting unused for years, the hinge hardware usually needs attention first so the motor isn’t fighting a gate that’s dragging.

That’s the honest part most quotes leave out. Show me the gate closing on its own and I’ll show you where it’s failing. A motor that strains against a bad hinge burns out in a season, and then you’re paying twice.

Can a Sunrise Manor Gate Opener Be Repaired Instead of Replaced?

Often, yes. Roughly six out of ten openers we look at in Sunrise Manor can be fixed rather than swapped. Control boards, limit switches, safety sensors, battery backups, and arm hardware are all replaceable parts. What usually can’t be saved is a motor with a burnt winding or a gearbox that’s been grinding itself down for years.

We’re set up to weld on site, so if a bracket has cracked or a hinge has torn loose, the gate stays in your driveway. No hauling, no mystery drop-off fee. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.

What Brands Can You Service in Sunrise Manor?

We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the vast majority of residential gates in this part of the valley, plus most of what homeowners bring over from Las Vegas.

If your opener is old or a brand we haven’t seen before, bring a photo of the label and we’ll tell you what parts are available. Repairs get a written 90-Day Done Right Promise. If it isn’t right, one call brings us back. We fix it.

How Does a Gate Motor Job Work From First Call to Final Test?

  1. You call. A live person answers, 24/7. Tell us what the gate is doing.
  2. We schedule a window. Inside the county, there’s no trip charge. We show up when we said we would.
  3. We inspect the gate, post, hinges, and control box. Not just the motor. The gate as a whole.
  4. We give you an upfront number in writing. No surprises at the door, and no estimation games.
  5. We do the work on site. Repairs and welding happen in your driveway, not a warehouse.
  6. We test the reversing feature and run the gate. Safety hardware has to work, not just look installed.
  7. You get the written 90-Day Done Right Promise. Stamped on the job, not buried in fine print.

What Should a Homeowner Check Before Calling?

A quick look before we arrive saves time and tells us more. Here’s what’s worth checking:

  • Does the gate move freely by hand when the opener is off? If not, the problem may be the gate, not the motor.
  • Does the opener reverse when something gets in its path? If not, stop using it until it’s fixed. A gate that won’t reverse is a hazard, not just a headache.
  • Are the safety sensors clear of dust, weeds, or a tipped-over planter?
  • Is the control box showing an error light? Note the pattern of blinking. It’s often the fastest diagnosis.
  • Is the hinge post solid? A wobbling post means a different conversation than a motor that won’t start.

We don’t hand you a step-by-step to service the motor or the high-voltage wiring yourself. Those parts can shock or injure. That’s a job for a trained tech with the meter to test current and the tools to do it safely.

Does a Sunrise Manor Gate Opener Need a Permit?

Most residential gate opener replacements don’t require a fresh permit if you’re replacing like-for-like. Adding a new electrical run to the gate is where it usually matters, and that falls under Clark County code for exterior wiring. We’ll tell you what we see and whether it applies to your gate before we quote it. Nobody likes surprise paperwork.

FAQs – Gate Motor & Opener Cost

How much does a gate motor repair cost in Sunrise Manor?

Most gate motor repairs in Sunrise Manor run $185 to $340. Limit switch and sensor fixes sit at the low end, control board replacements at the high end. Call (844) 761-8729 for an exact quote. Estimates are free.

Is it cheaper to repair or replace a gate opener?

Repair is almost always cheaper when parts are available, so we check that first. A $240 control board beats an $850 to $1,500 replacement any day. We’ll tell you which way the numbers point for your specific opener.

Can a new gate opener be installed on an older gate?

Yes, and it’s common in Sunrise Manor, where plenty of gates have been standing since the 1990s. We check the post, hinges, and hardware first, because a motor bolted to a loose post is just a motor that gets replaced twice.

Do you charge a trip fee in Sunrise Manor?

No trip charge inside the county. Show up, look, tell you what’s wrong. We give an exact quote before we start.

How long does a gate opener installation take?

A single swing or slide install is typically a four- to six-hour job. Dual swing installs and pedestals for keypads run a full day. We schedule it around the window you need worked out.

What about a 90-day promise?

Every job gets a 90-Day Done Right Promise, in writing. If it isn’t right, one call brings us back. No voicemail, no runaround.

Pricing reflects the Sunrise Manor market as of 2026. Gatewood Fence & Gate Sunrise Manor offers free estimates, a $40 discount on repairs over $200, and a permanent 10% off for seniors and veterans. Call (844) 761-8729 and we’ll give you a straight number on the phone, before we ever pull into your driveway.

Written by the team at Gatewood Fence & Gate.

What Our Customers Say

★★★★★ 4.8 from 6+ reviews

"He builds the gates himself. That is not something you can say about the outfits that just order a panel in."

- Doreen Whitfield

"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."

- Salvador Arredondo

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

- Winston Achterberg
Need Gate Repair help in Sunrise Manor? Licensed & insured · same-day response · free estimates
Call (844) 761-8729

Request a Free Estimate

Tell us what's going on in Sunrise Manor. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch