Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Hinge & Roller Replacement: The Sunrise Manor Owner’s Guide
We replace failed and failing hinges and rollers on Ghost Controls gate systems in Sunrise Manor, and the installed price typically runs about $220 to $480 per gate for a hinge and roller set, depending on the model and how badly the gate has sagged into the post. Most hinge and roller jobs we do in Sunrise Manor are finished the same day you call, because this is a repair, not a custom order. You usually find out the part is going when the gate starts dragging, the roller squeals through the second half of its travel, or you can see daylight between a hinge and the post where there used to be none. That gap is the tell. A gate sags in the hinge post, not in the middle, and that is where we start.
Which Ghost Controls Models This Applies To
Ghost Controls makes a single family of heavy-duty automatic gate openers, and the hinge and roller hardware people call about most is the hardware on the gate itself: the hinge set at the post and the guide rollers that carry the panel along its track or swing. Ghost Controls openers are sold under model designations tied to the arm and control board series, and the model number is printed on the opener housing and stamped on the control box cover. Photograph that label before you call, and photograph the hinge post. We match the hinge and roller set to the model and to the gate weight class, because a light gate and a heavy tube gate use different hardware.
Where Ghost Controls gets people is the track and swing distinction. Plenty of owners order a swing hardware set for a gate that actually slides, or the reverse, because the listing photos all look similar. Measure the gate panel width and thickness and note whether the gate swings or slides before you order anything. On the OEM-versus-aftermarket question: Ghost Controls replacement hardware is the safe match, and a quality aftermarket hinge and roller of the same spec works fine and costs less. We won’t sell you a part that doesn’t fit your gate, and we don’t claim to keep parts in stock or carried on a truck. We source the right set for your model and bring it with us.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your Ghost Controls Hinge & Roller Replacement Is Failing
Most owners in Sunrise Manor notice the gate before they notice the part. Here’s what it actually looks like when the hinge and roller set is on its way out:
- The gate drags or scrapes at one point in its travel. A worn roller loses its round profile and starts riding flat, so the panel drops a fraction of an inch at that spot. If it only scrapes in one place, the roller is usually the culprit, not the opener.
- The gate sags and won’t close flush. Hinge pin wear lets the panel drop at the post. This is the one people blame on the opener motor, and it almost never is. Fix the panel without the post and you’ll fix it twice.
- A visible gap opens between the hinge and the post. Loose or wallowed hinge bolts let the whole panel shift. Left alone, the hinge plate tears the post metal, and that turns a hardware swap into a welding job.
- The roller squeals or grinds through the middle of the cycle. Nevada grit and dry heat cook the lubricant out of the roller bearing. Once the bearing is dry, the roller eats itself and the noise gets worse every week.
- The gate closes on its own or drifts off the stop. A hinge that has lost its alignment can’t hold the panel true. Show me the gate closing on its own and I’ll show you where it’s failing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed hinge and roller replacement in Sunrise Manor runs about $220 to $480 per gate, parts and labor together, quoted before we start. What moves you up or down that range:
- Hinge and roller set itself: roughly $60 to $150, depending on the Ghost Controls model and gate weight class.
- Labor: about $120 to $260, set by how many hinges and rollers and how much realignment the gate needs.
- Post repair or welding: if a hinge has torn the post, add on-site welding, which is a separate quote item.
- Track or guide wear: if the rollers are shot because the track is worn, the track gets priced in too.
We quote and agree on the price before any work starts, so there’s no number at the door that you didn’t hear on the phone. Every job carries the 90-Day Done Right Promise in writing. If a hinge or roller we installed gives you trouble inside that window, one call brings us back. Right now we’re also running $40 off any repair over $200 and no trip charge inside the county, and seniors and veterans get a permanent 10% off.
DIY or Call Us?
Some of this is safe to check yourself. You can wiggle the gate at the hinge post with the opener powered off and feel for play, look for rust trails and metal shavings under the hinge, and spin each roller by hand to hear whether the bearing is dry. If a roller spins free and the hinge is tight, you may only need lubrication, and we’ll tell you that on the phone.
What goes wrong in DIY is the alignment. A hinge and roller set isn’t a bolt-off, bolt-on swap if the gate has sagged, because the new hinges have to be set to bring the panel back true, and getting that wrong loads the opener arm and burns out the motor. On a heavy gate, a hinge that lets go while you’re under it is a real injury risk, so if you see a gap at the post or a torn plate, stop there. We’re certified to service Ghost Controls, along with LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule. Give us a call at (844) 761-8729. A live person answers, day or night, and I’ll come look at it myself.
FAQs
In Sunrise Manor’s heat and blowing dust, expect five to eight years out of a hinge and roller set before wear shows, and less on a gate that never gets lubricated. The dry air pulls lubricant out of the roller bearings faster than in a wet climate, and the grit works into the hinge pins. A twice-a-year lube and a look at the hinge plates stretches that considerably.
Sometimes, yes. A dry roller that still spins round usually just needs cleaning and grease, and a tight hinge with a little play can sometimes be adjusted and re-torqued. Once the roller has gone flat or the hinge pin is worn through, replacement is the honest answer. We’ll tell you which one you’re looking at before we quote a thing. Call (844) 761-8729 for a free second opinion on any estimate you’ve already been given.
A standard hinge and roller replacement takes about one to two hours per gate, and it’s a same-day repair in most Sunrise Manor cases. If the hinge has torn the post and we’re welding, plan on longer and we’ll tell you that up front, not after the work starts. Call (844) 761-8729 and we’ll give you a real window.
We start with the model number on your Ghost Controls opener housing and control box, then match it to the gate’s weight class and whether it swings or slides. We don’t keep a warehouse of parts, so we source the correct hinge and roller set for your model and bring it to the job. That’s how you avoid the wrong-set-in-a-box problem that has a lot of Sunrise Manor owners ordering twice. Call (844) 761-8729 with a photo of the label and we’ll get it moving.
Gatewood Fence & Gate Sunrise Manor is an independent service provider and is not affiliated with Ghost Controls. We service the brand, we don’t represent it.
Gatewood Fence & Gate has been locally owned and owner-operated since 2001, with a published address and license number anyone can look up. Our technicians have up to 25 years of experience, and every job carries the 90-Day Done Right Promise in writing. If your gate is dragging and you want it looked at in Sunrise Manor, call (844) 761-8729 for a free estimate.
Written by the team at Gatewood Fence & Gate Sunrise Manor, serving Sunrise Manor and nearby areas.