Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterElectric Gate Repair in Sunrise Manor, NV
Electric gate repair in Sunrise Manor usually runs $180 to $340 for common openers and control issues, and most residential driveway gates can be back in service the same day we look at them. That covers a LiftMaster or Linear arm that stopped responding, a control board fried by a monsoon surge, or a slide gate that opens fine and then refuses to close. If your gate is stuck open or moving on its own, call (844) 761-8729 and a live person picks up, day or night.
Gatewood Fence & Gate Sunrise Manor is owner-operated, and the work is done the way it should be: the gate gets diagnosed in your driveway, welded on site when the frame calls for it, and repaired before anyone reaches for a replacement quote. We service LiftMaster, FAAC, BFT, Linear, and five other major brands. When the trouble is structural rather than electrical, we fold it into our broader Gate Repair work so you get one straight answer, not two competing bids.
Key Takeaways
- Most electric gate repairs in Sunrise Manor land between $180 and $340, with an exact price given before any work starts.
- We repair first and replace only when a part is genuinely past saving. On-site welding keeps your gate in your driveway.
- Calls are answered by a live person 24/7. Every job carries the 90-Day Done Right Promise in writing.
- $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
When You Need Electric Gate Repair
Electric gates fail in patterns. After 25 years of experience between our technicians, we can usually hear the problem before we see it. Here’s what brings people to the phone in Sunrise Manor:
- The gate opens but won’t close (or the reverse). Nine times out of ten this is a photo-eye or safety-loop issue, not the motor. Sun-baked wiring along the driveway edge is a frequent culprit, especially on west-facing lots where the afternoon heat works on it all summer.
- The arm or operator grinds or hums without moving. On a Linear or LiftMaster swing arm, that sound usually means a stripped gear or a control board that took a surge. We see a spike in these after the summer lightning season, when a nearby strike sends a jolt through the line.
- The gate drifts open on its own or stops halfway. A limit switch has lost its setting, or the control board is getting bad readings. Ours kids’ gates that sit in full desert sun often show failing capacitors that cause exactly this.
- You have to hold the remote at the exact right spot. Weak receiver range points to an aging board or a corroded antenna connection. Repairable far more often than the manufacturer’s manual suggests.
- The gate drags, sags, or scrapes the ground as it moves. That’s a hinge-post problem, not an opener problem. A gate sags in the hinge post, not in the middle, and that is where we start. Fix the panel without the post and you’ll fix it twice.
- The gate won’t respond at all after a windstorm. Blown-down dust and debris jam tracks and sensors, and the spring winds out here push gates harder than most openers are rated for. Sometimes the fix is a clearing and a re-limit, sometimes it’s a part.
Our Electric Gate Repair Process
We don’t guess and we don’t swap parts hoping one sticks. Here’s how an electric gate repair call goes from the first ring to the final test:
- You call and talk to a person. No voicemail, no queue, no chatbot. Tell us the gate type and what it’s doing, and we’ll give you a realistic time window and a straight read on what it likely involves.
- We show up in the window we promised. Background-checked, uniformed technicians, and the price we quoted on the phone is the price you see. No surprise at the door.
- Full diagnostic at the gate. We test the operator, the control board, the safety sensors, the wiring, and the gate’s mechanical movement. Show me the gate closing on its own and I’ll show you where it’s failing – the mechanical drag and the electrical fault are often two different problems wearing one symptom.
- On-site welding and mechanical repair. Hinge posts, frames, tracks, and mounts get welded and fixed right there in your driveway. The gate never leaves your property.
- Motor, board, and control work. We repair or replace the operator, control board, photo-eyes, keypads, and receivers. We’re certified on LiftMaster, FAAC, BFT, Linear, and five other brands, so we’re matching the right part to the right system, not forcing a universal fit.
- Test, walk you through it, and hand you the promise in writing. We cycle the gate until it’s right, show you what we did, and leave the 90-Day Done Right Promise stamped on the job. One call brings us back if anything isn’t right.
Electric Gate Repair Pricing in Sunrise Manor
Nobody likes a mystery number. Here’s what electric gate repair typically costs in Sunrise Manor, so you can plan before you call:
| Repair Type | Typical Range |
|---|---|
| Safety sensor / photo-eye repair or realignment | $120 – $220 |
| Control board repair or replacement | $200 – $420 |
| Opener arm / operator motor repair | $250 – $650 |
| Limit switch and travel re-setting | $100 – $180 |
| Wiring repair (driveway run, corroded connections) | $150 – $400 |
| Hinge post / frame welding (mechanical) | $180 – $500 |
What moves the price: the age and brand of the operator, whether parts are still being made for it, how far the wiring run is, and whether the trouble is electrical alone or electrical plus structural. A gate that needs both a board and a hinge-post weld costs more than one that needs only the board, and we’ll tell you which before we start.
Standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate you’ve already been given, and a permanent 10% discount for seniors and veterans. Every estimate is free and given upfront.
Is it cheaper to repair or replace? For most gates under about 15 years old with a sound frame, repair wins by a wide margin. We’ll tell you plainly when a gate is genuinely at the end of its life, and we won’t push a replacement you don’t need. The name is on the shop, and the shop is down the road – that is the oldest accountability there is.
FAQs – Electric Gate Repair
How much does electric gate repair cost in Sunrise Manor?
Most electric gate repairs in Sunrise Manor fall between $180 and $340, with sensor fixes on the low end and full opener or board work higher. You get an exact, upfront price before any work starts, and the standing offers ($40 off repairs over $200, no trip charge in the county, 10% off for seniors and veterans) apply. Call (844) 761-8729 for a free estimate.
Can you repair my electric gate the same day?
In most cases, yes. We keep common LiftMaster, Linear, and FAAC parts on hand, and many sensor, board, and limit-switch jobs are finished in a single visit. If your gate is stuck open, call and a live person will get you the soonest window. Call (844) 761-8729 to check today’s availability.
My gate opens but won’t close – is that a big repair?
Usually not. An open-but-won’t-close gate is most often a safety sensor, a photo-eye, or a limit setting rather than a dead motor, and those tend to be the least expensive repairs on the list. We diagnose it in your driveway and quote before touching a thing. Call (844) 761-8729 and we’ll get eyes on it.
Do you work on all gate opener brands?
We’re certified to service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the vast majority of residential electric gates in Sunrise Manor, so you’re not stuck with whoever installed it originally. Call (844) 761-8729 and tell us what you’ve got.
Get Your Electric Gate Working Again
When your electric gate stops doing its job, you don’t need a call center three states away or a quote that changes at the door. You need a name you can verify, a face you’ll see again, and someone who shows up in the window they promised. That’s what you get from Gatewood Fence & Gate Sunrise Manor – owner-operated since 2001, with the 90-Day Done Right Promise in writing on every job. Call (844) 761-8729 for a free estimate, and let’s get your gate closing the way it should. If you’d like to see everything else we handle, start at our home page and have a look around.
Written by the team at Gatewood Fence & Gate Sunrise Manor, serving Sunrise Manor.