Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Access Control Across Whitney
If you live in Whitney and your driveway gate is still manual, or the builder’s keypad stopped answering years ago, the fix is usually more than a keypad swap. Most Whitney gates built in the 1980s and 90s never had power run to the curb, so adding keypad entry, remote control, or a video intercom means setting a new post and pulling conduit before anything electronic goes on. We’re Gatewood Fence & Gate, and we know that job well. Call (844) 761-8729 and a live person answers, day or night.
Why Gatewood Fence & Gate Sunrise Manor Is Whitney’s Preferred Gate Access Control Company
Whitney is a stucco-and-block neighborhood where the gates are original and the hardware is tired. We’ve done enough work across 89122 to know what a 1990 builder operator sounds like when the control board is cooked, and we don’t get surprised by the shelf of obsolete parts that no longer exists. Our team has been fixing gates like these since 2001, and the name is on the shop, so you can look us up and drive over if it matters to you.
Whitney customers tell us they called because the last outfit quoted one price on the phone and a different one at the door. That doesn’t happen here. Pricing is upfront and agreed before any work starts, and our technicians have up to 25 years of experience on gates like yours. The 90-Day Done Right Promise is stamped in writing on every job, so one call brings us back if something isn’t right. We answer every call with a live person around the clock, not a voicemail, and we work the whole Whitney area, from the streets off Sahara Avenue out toward the open desert east of the neighborhood.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Access Control Services in Whitney
Access control in Whitney is really an electrical-and-footing job before it’s an electronics job. Here’s what that looks like broken out.
Keypad Entry
A keypad only works as well as the post it’s mounted to and the power feeding it. On a Whitney gate that went in manual, we set a footing, run conduit, and pull 120V to the new post before the keypad goes on. On newer gates that already have power, we mount the keypad, wire it into the operator, and test that every code fires the gate cleanly.

Remote Control
Remote control is the most common ask in Whitney’s builder-grade subdivisions, usually because the original operator has lost the ability to hear the remote even though the arm still moves. We diagnose the receiver and control board first, then repair or swap the operator so a single remote reliably triggers the gate. No half-fixed receivers left on the post.

Phone Entry
Phone entry lets a guest or delivery driver reach you instead of fumbling with a code. On a Whitney gate, that means a reliable voice module tied into an operator that’s actually healthy, so the call connects and the gate opens in one motion. We service the major phone-entry and intercom brands, including DoorKing and Linear, and we test the full call-to-open sequence before we leave.

Card Reader
For a home with regular visitors, a card reader gives each person their own credential and a clean way to revoke access. We mount the reader, wire it to the operator, and confirm the gate’s safety devices still trip properly before anyone uses it. Card readers on Whitney gates pair well with video intercom so you can see who’s at the gate before you open it.
Trusted Brands We Service in Whitney
We service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your Whitney gate runs a Builder’s original unit that’s now obsolete, we tell you plainly whether parts exist or whether a swap is the honest answer. We don’t stock parts on a truck; we order what your gate needs and schedule the work with a written price up front. Turnaround on common access-control parts is quick, and we’ll give you a real window, not a vague one.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Access Control Problems We See in Whitney Homes
- Heat-cooked control boards. Whitney summers run past 110°F and the UV is relentless, so builder-grade operator control boards crack and stop registering keypad or remote commands even though the gate arm still works fine. That’s the classic “keypad quit but the gate still opens by hand” call.
- Manual gates retrofitted without a power run. Somebody mounted a keypad to a post with no conduit feeding it, and now it’s dead or running on a battery that dies every few months. Doing it right means a footing and a proper 120V run.
- Desert grit in the rollers and hinges. The afternoon winds off the open desert east of Whitney pack fine dust into rollers, hinges, and rack and pinion, which seizes movement and stalls the gate mid-travel. A can of compressed air and a dry lubricant is often the first fix before anything electronic.
- Obsolete operators 25 to 35 years old. The original builder unit has no replacement parts left, so keeping phone entry or smart access working means a full operator swap. We tell you that straight rather than selling you a part that doesn’t exist.
Pricing for Gate Access Control in Whitney, NV
A typical keypad entry install on a Whitney gate that already has power runs $250 – $450, and a new remote or receiver setup is $150 – $300. Phone entry and video intercom land around $400 – $900 depending on the unit and wiring. If your gate went in manual and needs a new post, a footing, and conduit run to a 120V source, that electrical work adds $600 – $1,500 to the job, and that’s the part generic access-control pages leave out. Every price is quoted and agreed before any work starts, and the estimate is free. We also take $40 off any repair over $200 and give a permanent 10% discount to seniors and veterans. Call (844) 761-8729 for an exact number on your gate.
We Also Serve Cities Near Whitney
Whitney sits close to a lot of the east valley, and we cover the neighbors too: Sunrise Manor, Winchester, Paradise, and Las Vegas. If your gate is a few miles over the line, the same upfront pricing and the same 90-Day Done Right Promise come with it. You can read more about our Gate Access Control work across the area, or look at what we do specifically for Gate Access Control in Whitney.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Access Control in Whitney
Yes. We set a new post at the gate’s edge with its own footing and run conduit and power to it, so the driveway surface stays intact. The trench follows the edge of the block wall rather than cutting across the slab, and we backfill and compact when we’re done. Call (844) 761-8729 and we’ll walk your gate and give you a written price.
Heat and UV cook the operator’s control board and the keypad’s plastic housing, so the electronics stop registering long before the gate mechanism fails. Whitney’s 110°F-plus stretches are hard on builder-grade boards, and once the board is heat-cracked, replacing the keypad alone won’t fix it. We diagnose the board first so you’re not paying twice. Call (844) 761-8729 for an exact quote.
Yes. Entrapment protection is required under UL 325 for any automatic gate, and photocells or edge sensors must actually trip the gate closed and reverse it, not just be mounted and wired. We test the full trip-and-reverse sequence on every install and repair. If you’re not sure yours works, call (844) 761-8729 and we’ll check it.
Yes, a solar opener can work where running 120V to the post isn’t practical, and brands like Ghost Controls and Mighty Mule make units well suited to a Whitney side-yard gate. The catch is that Whitney’s dust and heat wear out plastic rollers and bushings faster than the electronics, so the mechanical side needs the same attention. We’ll quote both the solar and wired options so you can compare. Call (844) 761-8729 for a free estimate.
We service nine major brands, including DoorKing and Linear for card readers and phone entry, along with LiftMaster, FAAC, BFT, Viking, Ghost Controls, Elite, and Mighty Mule. If your gate runs an obsolete unit with no parts left, we tell you that plainly and quote a compatible swap. Call (844) 761-8729 and we’ll confirm what fits your gate.
If your Whitney gate needs keypad entry, remote control, phone entry, a card reader, video intercom, or smart access done right, call (844) 761-8729 for a free estimate. A live person answers around the clock, pricing is agreed before any work starts, and the 90-Day Done Right Promise is in writing on every job.
Written by the team at Gatewood Fence & Gate Sunrise Manor.