Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in Sunrise Manor, NV
Automatic gate repair in Sunrise Manor usually means getting a gate that has stopped opening, stopped closing, or started acting unpredictably back to doing its one job reliably. Most repairs we see here are arm or operator problems, damaged hinges and posts, misaligned tracks, or safety sensors that have drifted out of line. At Gatewood Fence & Gate, we repair the gate and the operator in your driveway rather than swapping parts that don’t need swapping, and we back every job with the 90-Day Done Right Promise in writing.
Call (844) 761-8729 and a live person answers, day or night. You’ll get no-hassle upfront pricing, a free second opinion on any written estimate you already have, and no trip charge inside the county. If a national outfit quoted you one number on the phone and another at the door, we understand why you’re skeptical. The name is on the shop, the shop is down the road, and that is the oldest accountability there is.
This page covers automatic gate repair specifically. For the broader picture on hinges, posts, and manual gates, start with our Gate Repair in Sunrise Manor page or the Gate Repair service overview.
When You Need Automatic Gate Repair
These are the calls we get most from Sunrise Manor homeowners. If any of them sound familiar, the gate is telling you something.
- The gate won’t open or close at all. No movement, no sound, or a faint click from the operator. Could be a dead battery in the remote, a tripped breaker, a failed control board, or a burned-out motor. We test the whole chain before we quote anything, because the fix is rarely the first thing it looks like.
- It opens partway, stalls, then reverses. This is a classic safety-reverse symptom. The gate thinks it hit something, so it backs off. On LiftMaster and Linear operators especially, it’s usually a sensor, a limit setting, or an obstruction the gate is “seeing.” Show me the gate closing on its own and I’ll show you where it’s failing.
- The gate sags and drags on the ground. A gate sags in the hinge post, not in the middle, and that is where we start. Fix the panel without the post and you’ll fix it twice. Sunrise Manor’s dry heat and summer monsoons swing hard on wood and steel posts, and we see plenty of both that have lost their footing.
- The arm or operator is loose, bent, or grinding. Swing and slide operators take a beating. A bent arm, worn pivot bushings, or a gear that’s grinding metal-on-metal will only get worse and can burn out a motor that was otherwise fine.
- The remote or keypad works when it feels like it. Intermittent operation points to a receiver going bad, a wiring connection that’s corroded, or a keypad that’s seen too many summers. We test range, wiring, and the board before replacing anything.
- The gate opens on its own at odd hours. Ghost openings are usually a stuck sensor, a shorted wire, or a neighbor’s remote on the same frequency. That’s not just an inconvenience, it’s a security risk, and it’s worth a same-day look.
We’re certified to service nine major gate brands, and the automatic systems we see most in Sunrise Manor are LiftMaster, FAAC, BFT, and Linear. That means the parts and the know-how are already in hand when we pull up.
Our Automatic Gate Repair Process
Here’s how a repair actually runs, start to finish. No mystery, no surprises at the door.
- You call and a live person answers. We ask what the gate is doing, what brand it is if you know, and how long it’s been acting up. That conversation gets us most of the way there before we leave the shop.
- We come out and look before we touch anything. A free estimate means exactly that. We inspect the gate, the hinge posts, the operator, the wiring, and the safety sensors. If we can fix it in the driveway, we fix it in the driveway.
- We give you a straight, written quote. Upfront pricing, in writing, before any work starts. If you’ve got a written estimate from another company, we’ll give you a free second opinion on it. We’d rather you compare than feel pushed.
- We weld and repair on site. On-site welding is a big part of what makes a true repair possible. Broken hinge brackets, cracked frames, worn pivot points: a lot of gates that other outfits want to haul off and replace can be welded and squared right where they stand.
- We test the whole system, not just the broken part. Once it moves, we run the gate through open and close cycles, check the safety reverse, reset limits if needed, and make sure the remotes and keypad are doing what they should.
- We put the 90-Day Done Right Promise in writing. If something we touched isn’t right, one call brings us back. No runaround, no “that’s not covered.”
Every job is handled by background-checked, uniformed technicians, and the person who shows up is the person you’ll see again at the hardware store.
Automatic Gate Repair Pricing in Sunrise Manor
Automatic gate repair in Sunrise Manor generally runs from about $150 for a simple sensor or remote fix up to $900 or more for a full operator replacement. Most of the calls we run land in the $200 to $500 range, and we quote it in writing before we start so the number doesn’t move.
| Repair type | Typical range | What drives the cost |
|---|---|---|
| Remote, keypad, or receiver repair | $150 – $300 | Brand of receiver, whether rewiring is needed |
| Safety sensor or limit adjustment | $150 – $275 | Sensor type, panel wiring condition |
| Hinge, post, or bracket repair (with welding) | $250 – $550 | Post condition, whether the frame needs squaring |
| Operator arm or gear replacement | $300 – $650 | Brand (LiftMaster, FAAC, BFT, Linear), arm type |
| Control board or motor replacement | $400 – $900 | Brand and model, board availability |
| Full operator replacement (installed) | $900 – $1,800 | Gate weight, swing vs. slide, brand chosen |
What pushes a repair toward the higher end: a gate that’s been dragging for months (so the post gave out too), an operator that’s been run on a failing sensor, or a gate whose wiring has been chewed, sun-cracked, or spliced by someone in a hurry. A lot of what we fix is sloppy work somebody left behind, and we charge for the repair, not a lecture.
Standing offers apply to every job: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. The estimate is free. Call (844) 761-8729 and we’ll sort out what’s actually wrong before anyone quotes you a number.
FAQs – Automatic Gate Repair
How much does automatic gate repair cost in Sunrise Manor?
Most automatic gate repairs in Sunrise Manor cost between $200 and $500, with simple sensor or remote fixes starting around $150 and full operator replacements running $900 to $1,800 installed. The final number depends on the brand, the gate’s condition, and whether welding or post work is involved. Call (844) 761-8729 for an exact quote. Estimates are free, and we’ll give you a second opinion on any written estimate you already have.
Can you repair my gate the same day?
Often, yes. We answer the phone around the clock, and many automatic gate repairs, including sensor fixes, remote and receiver problems, and limit adjustments, can be handled on the same visit. Welding and post repairs sometimes take a return trip if we need a specific part. Call (844) 761-8729 and we’ll tell you honestly what your gate needs and when we can get there.
My gate opens on its own. Is that a repair or a replacement?
That’s almost always a repair, not a replacement. Ghost openings usually trace to a sticking safety sensor, a shorted wire, a failing control board, or a remote riding the same frequency as a neighbor’s. We test the full system before quoting, and in most cases a single component fixes it. Call (844) 761-8729 and we’ll take a look. Same-day spots are often available.
Is it cheaper to repair or replace an automatic gate operator?
Repair is cheaper in most cases, and it’s what we recommend when it’s the honest answer. A new arm, gear, or control board on an otherwise sound LiftMaster, FAAC, BFT, or Linear system will usually run you a fraction of a new unit. Replacement makes sense when the motor is burned out or the housing is rusted through. We’ll tell you which one you’re looking at, straight. Call (844) 761-8729 for a free estimate and an upfront written price.
Which gate brands can you service?
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you’re not sure what’s on your gate, we can usually tell from the housing, the remote, or the control board. Call (844) 761-8729 and we’ll figure it out with you.
What is the 90-Day Done Right Promise?
Every job carries the 90-Day Done Right Promise in writing. If something we repaired isn’t right within 90 days, one call brings us back and we make it right. No fine print, no hedge language, no runaround. Call (844) 761-8729 and we’ll walk you through it before we start.
Why Sunrise Manor Homeowners Call Us
We’re locally owned and owner-operated, with a published address and license number anyone can look up. Business hours or not, a live person answers the phone. The person who shows up is background-checked, in uniform, and has up to 25 years of experience on gates like yours. And if a job needs a second look, you can drive to the shop and look us in the eye.
Whether you need a quick automatic gate repair or a broader look at the whole gate, we keep it simple: show up when we say, tell you the truth about what’s wrong, quote it upfront, and stand behind the work.
Give us a call at (844) 761-8729 for a free estimate. We’ll take a look at your automatic gate, tell you what it actually needs, and get it opening and closing the way it should.
Written by the team at Gatewood Fence & Gate Sunrise Manor, serving Sunrise Manor.