A Gatewood company - serving Sunrise Manor, NV

Ghost Controls Hinge & Roller Replacement in Sunrise Manor, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Hinge & Roller Replacement: The Sunrise Manor Owner’s Guide

We replace failed and failing hinges and rollers on Ghost Controls gate systems in Sunrise Manor, and the installed price typically runs about $220 to $480 per gate for a hinge and roller set, depending on the model and how badly the gate has sagged into the post. Most hinge and roller jobs we do in Sunrise Manor are finished the same day you call, because this is a repair, not a custom order. You usually find out the part is going when the gate starts dragging, the roller squeals through the second half of its travel, or you can see daylight between a hinge and the post where there used to be none. That gap is the tell. A gate sags in the hinge post, not in the middle, and that is where we start.

Call (844) 761-8729

Which Ghost Controls Models This Applies To

Ghost Controls makes a single family of heavy-duty automatic gate openers, and the hinge and roller hardware people call about most is the hardware on the gate itself: the hinge set at the post and the guide rollers that carry the panel along its track or swing. Ghost Controls openers are sold under model designations tied to the arm and control board series, and the model number is printed on the opener housing and stamped on the control box cover. Photograph that label before you call, and photograph the hinge post. We match the hinge and roller set to the model and to the gate weight class, because a light gate and a heavy tube gate use different hardware.

Where Ghost Controls gets people is the track and swing distinction. Plenty of owners order a swing hardware set for a gate that actually slides, or the reverse, because the listing photos all look similar. Measure the gate panel width and thickness and note whether the gate swings or slides before you order anything. On the OEM-versus-aftermarket question: Ghost Controls replacement hardware is the safe match, and a quality aftermarket hinge and roller of the same spec works fine and costs less. We won’t sell you a part that doesn’t fit your gate, and we don’t claim to keep parts in stock or carried on a truck. We source the right set for your model and bring it with us.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Ghost Controls Hinge & Roller Replacement Is Failing

Most owners in Sunrise Manor notice the gate before they notice the part. Here’s what it actually looks like when the hinge and roller set is on its way out:

  • The gate drags or scrapes at one point in its travel. A worn roller loses its round profile and starts riding flat, so the panel drops a fraction of an inch at that spot. If it only scrapes in one place, the roller is usually the culprit, not the opener.
  • The gate sags and won’t close flush. Hinge pin wear lets the panel drop at the post. This is the one people blame on the opener motor, and it almost never is. Fix the panel without the post and you’ll fix it twice.
  • A visible gap opens between the hinge and the post. Loose or wallowed hinge bolts let the whole panel shift. Left alone, the hinge plate tears the post metal, and that turns a hardware swap into a welding job.
  • The roller squeals or grinds through the middle of the cycle. Nevada grit and dry heat cook the lubricant out of the roller bearing. Once the bearing is dry, the roller eats itself and the noise gets worse every week.
  • The gate closes on its own or drifts off the stop. A hinge that has lost its alignment can’t hold the panel true. Show me the gate closing on its own and I’ll show you where it’s failing.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed hinge and roller replacement in Sunrise Manor runs about $220 to $480 per gate, parts and labor together, quoted before we start. What moves you up or down that range:

  • Hinge and roller set itself: roughly $60 to $150, depending on the Ghost Controls model and gate weight class.
  • Labor: about $120 to $260, set by how many hinges and rollers and how much realignment the gate needs.
  • Post repair or welding: if a hinge has torn the post, add on-site welding, which is a separate quote item.
  • Track or guide wear: if the rollers are shot because the track is worn, the track gets priced in too.

We quote and agree on the price before any work starts, so there’s no number at the door that you didn’t hear on the phone. Every job carries the 90-Day Done Right Promise in writing. If a hinge or roller we installed gives you trouble inside that window, one call brings us back. Right now we’re also running $40 off any repair over $200 and no trip charge inside the county, and seniors and veterans get a permanent 10% off.

DIY or Call Us?

Some of this is safe to check yourself. You can wiggle the gate at the hinge post with the opener powered off and feel for play, look for rust trails and metal shavings under the hinge, and spin each roller by hand to hear whether the bearing is dry. If a roller spins free and the hinge is tight, you may only need lubrication, and we’ll tell you that on the phone.

What goes wrong in DIY is the alignment. A hinge and roller set isn’t a bolt-off, bolt-on swap if the gate has sagged, because the new hinges have to be set to bring the panel back true, and getting that wrong loads the opener arm and burns out the motor. On a heavy gate, a hinge that lets go while you’re under it is a real injury risk, so if you see a gap at the post or a torn plate, stop there. We’re certified to service Ghost Controls, along with LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule. Give us a call at (844) 761-8729. A live person answers, day or night, and I’ll come look at it myself.

FAQs

Need Gate Repair help nationwide? Licensed & insured · same-day response · free estimates
Call (844) 761-8729
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Gatewood Fence & Gate Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch