Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Keypad & Intercom Repair: The Sunrise Manor Owner’s Guide
We repair and replace Ghost Controls keypads and intercom units in Sunrise Manor, with most keypad repairs landing between $145 and $310 installed and intercom work running $220 to $480 depending on the unit. Keypad swaps and wiring repairs can often be done same-day if you call early; a dead intercom that needs a new module is usually a scheduled job once we verify the part. Most Sunrise Manor owners find out something’s wrong the same way: the gate stops taking the code, or the box crackles and nobody answers. Maybe it works on the keypad but the house handset stays silent. Sunrise Manor sits in one of the harshest sun and dust zones in the valley, and outdoor access boxes here take a beating. We’ve pulled plenty of Ghost Controls keypads out here where the buttons still click but the membrane has gone brittle and no longer makes contact.
Which Ghost Controls Models This Applies To
Ghost Controls builds its line around the AXO, AXR, TSS1, and DTP1 families, and the keypads and intercom units that pair with them follow a few common designs: a wireless keypad that pairs to the operator, a wired keypad that needs a low-voltage run back to the control box, and the intercom modules that mount at the gate box with a handset in the house. Before we quote anything we look at the control board label inside the operator housing, not the sticker on the keypad, because the operator is what tells us which keypad version you actually need. Ghost Controls has changed transmitter and receiver compatibility across model years, and a keypad built for one receiver frequency won’t talk to a board from another run.
That’s the compatibility gotcha most Sunrise Manor owners hit: they order a keypad online that looks identical to the old one but pairs to a different receiver generation, so it never links. If you’re matching a part yourself, pull the operator model and serial from the control box label and compare it to the keypad’s documented pairing range before you buy. On OEM versus aftermarket, we’ll tell you straight. For Ghost Controls keypads, the OEM unit fits the existing mount and pairs cleanly; a quality aftermarket keypad can work but often means adapting the mount and re-checking the pairing, and on a Sunrise Manor fence line that’s extra holes in the box. We don’t stock parts and we don’t carry them on a truck, so we source the right unit to your model once we’ve seen it. We service Ghost Controls, and we also work on LiftMaster, Mighty Mule, and DoorKing.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your Ghost Controls Keypad & Intercom Repair Is Failing
- The code stops taking, but the remote still opens the gate. That points to the keypad’s transmitter or pairing, not the operator. If the remote works, the gate motor is fine and the problem lives in the access box.
- Buttons feel mushy or need a hard press. The rubber membrane and contacts wear out fast in Sunrise Manor heat. Once the dome switches flatten, the keypad registers a press only sometimes.
- Keypad lights flicker or go dark. Usually a failing low-voltage connection or a sun-cooked board. On a wired keypad, corrosion at the splice is a common culprit in Sunrise Manor.
- Intercom crackles, hums, or the house handset stays silent. The speaker, mic, or wiring at the gate box has degraded. Dust and heat get into the housing and the audio circuit goes first.
- Intermittent operation: works in the morning, dead by afternoon. Classic heat-related failure on a board that’s on its way out. Sunrise Manor summer afternoons push these boxes hard.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what keypad and intercom work runs in Sunrise Manor, installed, parts and labor together:
| Job | Installed range |
|---|---|
| Wireless keypad replacement (Ghost Controls-compatible) | $145 – $260 |
| Wired keypad replacement with splice and pairing | $190 – $310 |
| Intercom module repair or replacement | $220 – $480 |
| Wiring or low-voltage connection repair | $95 – $185 |
What drives the range: whether the keypad is wireless or wired, how much wiring repair is needed, and whether the intercom needs a full module or just a speaker or connection fix. We quote the price and you agree to it before any work starts. No surprises at the door. Every job carries our 90-Day Done Right Promise in writing. We also take $40 off any repair over $200, there’s no trip charge inside the county, and seniors and veterans get a permanent 10% discount.
DIY or Call Us?
Some things you can safely check yourself. Confirm the operator has power, look for obvious corrosion or a loose wire at the keypad, and try re-pairing per the Ghost Controls manual – that’s all low-voltage and safe to inspect. Where DIY goes wrong is guessing at the part and buying the wrong keypad for your receiver, then drilling new mounting holes to make it fit. If the box is wired, the low-voltage run can read fine at the keypad and fail at the splice, and chasing that without a meter wastes an afternoon. We’d rather you call and let us match the part to your model before you spend money on the wrong unit. Call (844) 761-8729 and we’ll sort out what you’ve actually got.
FAQs
Plan on roughly 5 to 8 years outdoors here, and the low end is common on a box that faces full afternoon sun. Sunrise Manor heat and dust age the membrane and board faster than a shaded install, so a keypad in direct sun often fails before one under a cover.
Sometimes, yes – a failed splice, corroded wire, or a loose connection is a repair, not a replacement. If the board or membrane has gone, replacement is the honest answer and we’ll tell you which one you’re facing after we look.
A wireless keypad swap is usually under an hour; a wired keypad or an intercom module can run one to two hours once we’ve confirmed the part. We’ll give you a real window and show up in it.
We pull your operator model and serial from the control box label first, then source the keypad or intercom that pairs to that generation. We don’t carry parts on a truck, so we order to your model rather than guess at the counter.
Call Gatewood Fence & Gate Sunrise Manor at (844) 761-8729 for a free estimate on your Ghost Controls keypad or intercom. A live person answers around the clock, and we’ll give you a straight price before any work starts.
Written by the team at Gatewood Fence & Gatewood Fence & Gate Sunrise Manor, serving Sunrise Manor and nearby areas.