Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Enterprise
When your gate stops working right, you don’t want a callback or a chatbot. You want a person who can look at it, tell you what’s wrong, and fix it in your driveway. We handle Gate Parts & Welding for homeowners across Enterprise, NV, and our technicians have up to 25 years of experience with the heat, the dust, and the aging iron that makes gates fail here. Call (844) 761-8729 and a live person answers, day or night.
Why Gatewood Fence & Gate Sunrise Manor Is Enterprise’s Preferred Gate Parts & Welding Company
We’re locally owned and owner-operated, with a published address and license number anyone can look up. That means when we say the 90-Day Done Right Promise is stamped in writing on every job, it’s a promise somebody real is standing behind, not a warranty buried in fine print three clicks into a website. The name is on the shop, and the shop is down the road.
Enterprise homeowners call us because we weld on site. We’d rather fix the gate in your driveway than haul it off or swap parts that don’t need swapping. Fix the panel without the post and you’ll fix it twice. That repair-first approach saves real money, and it’s why people in Rhodes Ranch and Southern Highlands keep our number in their phone.
Response time to Enterprise is quick because we know these subdivisions. We’re familiar with the 1990s – 2010s builder-grade iron and operators that fill this part of the valley, and we quote the price before any work starts. No surprise number at the door. Calls answered by a live person, 24/7, because gates don’t fail on a convenient schedule.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Enterprise
Hinge Replacement in Enterprise
Heat-warped hinges are the number one call we get in Enterprise. After enough 110°F summers, decorative iron swing gates start to sag and drag, and that sag lives right at the hinge post, not in the middle of the gate. Replacing worn hinges and re-aligning the gate brings it swinging true again.

Post Replacement in Enterprise
When a post has rusted through, bent from a monsoon wind gust, or worked loose in the caliche soil, no amount of bending the gate will fix it. We set a new post and weld the gate back to it so the whole assembly lines up the way it should. That’s the difference between a fix that lasts and a patch that fails by fall.

Rail Repair in Enterprise
Rail repair covers the horizontal bars, frames, and top rails that take a beating from sun and dust. A bent or broken rail throws off alignment and makes the gate drag on the ground. We weld the repair on site so the frame stays square and the gate keeps its shape through the cold snaps and the heat cycles.

Custom Welding in Enterprise
Custom welding is where our crew earns its keep. Adding a privacy panel, repairing a custom iron design, reinforcing a driveway gate for a heavier operator: we weld it in place, in your driveway, to your gate’s actual measurements. No hauling it off for a week. If you’re curious about the full range of work we do, our Gate Parts & Welding in Enterprise hub covers everything we handle locally.
Trusted Brands We Service in Enterprise
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, and Linear. We don’t stock parts on a truck, so we measure, order the right replacement, and schedule the visit – which keeps the price honest and means the part that goes on your gate actually fits it. For operators and keypads, we service the brands Enterprise homeowners actually have, and turnaround is usually quick. If your operator has a name on it, we can probably work on it.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Enterprise Homes
Enterprise isn’t a rust or frost climate, so the failures here look different from what you’d read about on a coastal repair site. These are the ones we see most.
- Heat-warped hinges and UV-faded keypads. Decorative iron swing gates lose alignment and their entry keypads stop reading codes after years of intense sun. The plastic housing turns chalky and the buttons get stubborn.
- Monsoon silt in the tracks and drive gears. Dust storms pack fine grit into slide gate tracks and rack and pinion, which jams the operator and can burn out a motor. Locals learn to rinse and relubricate tracks before the first 100°F week.
- Builder-grade operator failures. In older tract homes, plastic gears and limit-switch cams give out after years of 110°F cycling. This is where the mix of aging subdivisions and desert heat really shows.
- Wide driveway gates and heavy iron spans. Long driveways in the newer gated communities call for heavier operators built for the span. Undersized units burn up faster.
Here’s the one true local insight on this: Enterprise’s mix of 1990s – 2010s subdivisions means many original builder-grade gate operators are now 10 – 20 years old, and the 110°F summers plus monsoon dust accelerate failure of plastic gears and limit-switch cams more than coastal salt air ever would. That’s the pattern behind most of the calls we get here.
A typical scene: after a summer dust storm, a homeowner finds the slide gate stuck halfway. Fine silt has packed into the rack and pinion and the limit-switch cams of a builder-grade LiftMaster operator. A qualified technician rinses and relubricates the track, replaces worn rollers, and checks the loop detector and safety photocell alignment before the next hot stretch. If the gate is also sagging, the real fix is often at the hinge post, not the panel.
Pricing for Gate Parts & Welding in Enterprise, NV
| Service | Typical Enterprise range |
|---|---|
| Hinge replacement | $120 – $260 per gate |
| Post replacement | $350 – $650 |
| Rail repair / welding | $150 – $400 |
| Gate roller replacement | $100 – $220 |
| Latch & lock work | $90 – $200 |
| Custom welding | $200 – $600+ |
Those ranges reflect what this work actually runs in Enterprise. The total moves up with the size of the gate, whether the post has to be reset in the ground, and whether the operator needs work alongside the hardware. A standard hinge job often lands near the low end; a wide driveway gate needing a new post and re-weld sits higher. We quote the price and agree it with you before any work starts, so the number on the invoice is the one you already heard. Free estimates, and a $40 discount on any repair over $200.
We Also Serve Cities Near Enterprise
Enterprise sits just south of the Strip, and we work the surrounding valley too. If you’re nearby in Spring Valley, Paradise, Winchester, or Henderson, the same repair-first approach and the same written promise travel with us. Call (844) 761-8729 and tell us where the gate is; if it’s in the area, we’ll take a look. The 90-Day Done Right Promise comes with it.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Enterprise
Enterprise’s 110°F summers warp metal and dry out hinge joints until they sag and bind. Replacing the worn hinges and re-aligning the gate usually solves it, and a heavier-duty hinge helps it hold up through the next hot season. Call (844) 761-8729 for a free estimate.
Monsoon dust packs fine silt into tracks and drive gears, which jams the operator and can burn out the motor. Rinsing and relubricating the track before summer helps, and worn rollers or a misaligned photocell should get checked at the same time. Call us if the gate is already dragging.
Often it’s the track: silt buildup or a worn roller jams the gate before the operator ever struggles. If the track is clear and the operator still won’t run, the problem may be in the limit-switch cams or drive gear. We diagnose on site and quote the fix before we start.
Yes, solar works here, especially on long driveways where running mains power is impractical. The panels need occasional cleaning and the battery has a finite life in the heat, so a proper solar install should account for desert conditions from the start. Call for a free measure and a written price.
Automatic gates need photo-eye safety sensors and a loop detector or equivalent device to stop the gate on contact – the standard safe setup for any residential operator. Those components also fail in the heat and dust, so they should be tested with the gate. Call (844) 761-8729 and we’ll check them.
Got a gate that won’t swing, a post that’s failing, or an operator making noise after the last dust storm? Call (844) 761-8729 for a free estimate. A live person answers, and we’ll give you a straight price in Enterprise before any work begins.
Written by the team at Gatewood Fence & Gate Sunrise Manor.