A Gatewood company - serving Sunrise Manor, NV
Gate Motor & Opener in Enterprise, NV | Gatewood Fence & Gate Sunrise Manor - Gatewood Fence & Gate Sunrise Manor

Gate Motor & Opener in Enterprise - Free On-Site Survey, Written Price

Free on-site survey and a written price that includes the groundworks, the power run and the safety gear. Install date agreed before we order, and the system handed over tested and documented.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Motor & Opener Across Enterprise

If your driveway gate has started stalling, reversing on its own, or refusing to open in the afternoon heat, you’re in the right place. We handle gate motor and opener work all over Enterprise, from the iron driveway gates in Rhodes Ranch to the longer slide gates on the acreage parcels south toward the McCullough Range. Our technicians have up to 25 years of experience, and we know this desert the way you do: the 110°F summers and monsoon dust are harder on an operator than any cold snap back east. Call (844) 761-8729 and a live person picks up, any hour, any day. We quote the price and you agree to it before any work starts.

Call (844) 761-8729

Why Gatewood Fence & Gate Sunrise Manor Is Enterprise’s Gate Motor & Opener Company

Enterprise has a lot of gates that get sold a replacement when a repair would do. We’re the shop that fixes instead. On-site welding means your gate stays in your driveway instead of getting hauled off, and we’d rather clear a packed drive gear or reset a limit-switch cam than swap an operator that still has years in it.

Every job comes with the 90-Day Done Right Promise, stamped in writing, not buried in fine print. If it isn’t done right, one call brings us back. No runaround. We service nine major brands, including LiftMaster, Linear, FAAC, and BFT, and we do it without pretending we stock parts on a truck we don’t have – when a part needs ordering, we tell you the turnaround instead of guessing. What you get is a name on the invoice and a shop down the road, which is the oldest accountability there is.

We reach Enterprise fast and know the streets: Rhodes Ranch and Southern Highlands, the newer gated communities around Blue Diamond Road, the driveways off Decatur and Warm Springs, and the acreage entrances further south where mains power never made it. Calls are answered by a live person 24/7 – not voicemail, not a call center three states away. That matters when your gate is standing wide open at ten at night.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Motor & Opener Services in Enterprise

Whether it’s a stubborn operator or a gate that needs a fresh one, this is the work we do every week across Enterprise. For the full menu, see our Gate Motor & Opener hub.

Motor Repair in Enterprise

Most “dead” operators in Enterprise aren’t dead. They’re silt-packed, heat-stressed, or fighting a sagging gate that’s binding the mechanism. A typical Gate Motor & Opener problem here starts with a builder-grade LiftMaster or Linear slide gate that begins to stall or reverse intermittently after a dust storm – fine silt has packed into the drive gear and the limit-switch cams, and the 110°F heat has already aged the keypad and plastic housings. We rinse and relubricate the track, clear the cams, check the safety photocell and loop detector, and tell you plainly whether your operator has more life in it. Repair-first, always.

Motor Repair in Enterprise

Slide Motor Service in Enterprise

Slide gates are common in the newer gated communities south of the Strip, and the rack and pinion is where desert dust does its damage. When a slide gate drags or reverses randomly, we look at the track first and the motor second. Often the real culprit is a hinge post footing that’s settled, tilting the panel so it binds – fix the panel without the post and you’ll fix it twice.

Slide Motor Service in Enterprise

Solar Gate Opener for Rural Driveways

Acreage entrances around Enterprise – long driveways where trenching power out is impractical or just plain expensive – are a natural fit for a solar gate opener with battery backup. We size the panel and battery to your gate’s weight and daily cycles so it holds a charge through a cloudy stretch, and we’re honest about when solar isn’t the right call. This is measured and scheduled work, not same-day, so we come out, measure, and put a written price in your hands.

Solar Gate Opener for Rural Driveways

Battery Backup for Enterprise Gates

When the power drops in a monsoon, a gate without backup is a locked gate or an open one. We fit battery backup to swing and slide operators so your gate keeps working through an outage, and we check that the battery is actually holding – heat kills them faster than cold ever will.

Intercom Integration

UV takes out keypads and intercoms here before the operator gives up. Repeated 110°F summers crack plastic housings and fade entry keypads until they quit, often dragging the safety photocell down with them. We replace and integrate the intercom and keypad so you can see and talk to whoever’s at the gate.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 761-8729

Trusted Brands We Service in Enterprise

We service nine major gate brands – LiftMaster, Linear, FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – and we know their quirks in this climate. Builder-grade LiftMaster and Linear units are the most common in Enterprise tract homes, while FAAC and BFT show up on heavier iron gates in Southern Highlands. We don’t claim to stock parts locally; we diagnose, tell you what’s needed, and give you a real turnaround. You’ll get a straight answer on repair versus replace, and a written price before we start.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Motor & Opener Problems We See in Enterprise Homes

Heat and dust, not rust, are what take gates down in Enterprise. The 1990s-to-2010s stucco-and-iron subdivisions here have their own failure patterns, and nearly all of them trace back to the desert:

  • Heat-warped hinges and sagging panels. A gate that sags in the hinge post, not the middle, binds the operator until it stalls or reverses. The motor usually gets blamed when it’s really a failing hinge post footing.
  • Silt-packed drive gears and cams. Monsoon dust works into the rack and pinion and the limit-switch cams, especially on builder-grade operators in newer tract homes. After a big dust storm, rinse and relubricate the track before the first 100°F week or the gate will seize.
  • UV-faded keypads and cracked housings. Repeated 110°F summers degrade keypad entry and plastic operator components, often taking the intercom and safety photocell down with them.
  • Batteries that quit in the heat. Power backup that worked last year can be flat by July. We test and replace before an outage leaves you with a stuck gate.

Pricing for Gate Motor & Opener in Enterprise, NV

Here’s what this work actually runs in Enterprise. A diagnostic and tune-up, including a rinse-and-relube, cam reset, and safety check on an existing operator, typically runs $95 – $175. A repair on a builder-grade slide or swing operator generally lands in the $150 – $400 range, and hinge-post or footing corrections run $300 – $650 depending on how deep the post sits in our caliche-heavy ground. A full operator replacement with a heavy-duty unit runs $900 – $1,800 installed, and a solar opener with battery backup for a long rural driveway typically comes in between $1,400 and $2,800 based on panel, battery, and span. The price is quoted and agreed before any work starts – no invoice bigger than the quote. Estimates are free, and standing offers include $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (844) 761-8729 for an exact number.

We Also Serve Cities Near Enterprise

We work the gates around Enterprise too – Gate Motor & Opener in Enterprise and the neighboring communities of Spring Valley, Paradise, Winchester, and Henderson. If you’re just over the line in any of them, call and we’ll tell you straight whether we cover your street. Same live person, same written price before we start.

Serving Enterprise, NV – Our Local Coverage Area

We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Motor & Opener in Enterprise

Why Enterprise Chooses Gatewood Fence & Gate Sunrise Manor

We set the standard for gate motor & opener in Enterprise.

30-60 Min Response

Fast dispatch across Enterprise. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Enterprise

Getting your gate motor & opener handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate motor & opener needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Enterprise - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate motor & opener pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically the same day.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Enterprise Customers Say

Trusted by homeowners across Enterprise and surrounding areas.

★★★★★

"He builds the gates himself. That is not something you can say about the outfits that just order a panel in."

Doreen Whitfield
★★★★★

"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."

Salvador Arredondo
★★★★★

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

Winston Achterberg

Ready for Gate Motor & Opener in Enterprise?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Enterprise.

(844) 761-8729

Request a Free Estimate in Enterprise

Tell us about your gate motor & opener needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch