Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Boulder City
If your gate is dragging, won’t latch, or the operator quit on you, you’re in the right place. We repair gates all over Boulder City, from the historic district streets near the old dam-era neighborhoods out to the HOA patio homes near the 89005 edges, and we know how these gates were built and why they fail. That matters here more than most towns. Boulder City gates aren’t one-size-fits-all, and a repair that works on a 1990s stucco subdivision gate won’t hold on a 1940s wrought-iron swing gate hung on a masonry pier. Call (844) 761-8729 and a live person answers, day or night.
Why Gatewood Fence & Gate Sunrise Manor Is Boulder City’s Preferred Gate Repair Company
Boulder City residents have been burned before, usually by a national outfit that quoted one number on the phone and charged another at the door. We’re the opposite. We repair first and replace only when replacement is genuinely the cheaper answer, and every job carries the 90-Day Done Right Promise in writing. If something we fixed isn’t right, one call brings us back. No runaround.
Our technicians have up to 25 years of experience, and they’re background-checked and uniformed on every job. We’re certified to service nine major gate brands, so whether you’ve got a FAAC swing operator or a Linear slide unit, we’ve worked on it before. Hal’s name is on the shop, the shop’s down the road, and the phone gets answered by a live person around the clock. That’s the oldest accountability there is.
When you call, you get a real estimate up front and a promise we don’t move the number once the work starts. You can also take us up on a free second opinion on any written estimate, no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Boulder City
We cover the whole range of gate work in Boulder City, but a few services come up again and again here because of the town’s housing and climate. Here’s where we spend most of our time.
Hinge & Post Repair
Old gates in Boulder City don’t sag in the middle of the panel. They sag at the hinge post, and that’s where we start. Fix the panel without the post and you’ll fix it twice. On the 1930s – 1950s wrought-iron gates hung on masonry piers, the original hinges have taken 70+ years of Mojave sun, and the wooden post behind the pier is often dried and split. We hand-dig to locate the old footings before setting anything new.

Gate Realignment
A gate that won’t latch, drags on the ground, or swings on its own is usually out of square. We check the post, the hinges, and the gate frame together, because realigning the panel alone just buys you a season. On the newer aluminum and vinyl HOA gates, warping from summer dry heat throws the whole gate off, and a proper realignment gets it swinging clean again.

Automatic Gate Repair
When an operator quits, it’s often not the whole unit. On older LiftMaster and Linear slide gates, we check the board, the rack-and-pinion, and the safety photocells before anyone talks about a new operator. Summer heat cooks control boards here, and blowing monsoon sand packs the rollers so the motor works harder than it should. We repair what can be repaired and tell you straight when it can’t.

Electric Gate Repair
Electric swing and slide gates fail in predictable ways once the wiring and controls age. We trace the fault to the source, whether it’s a tired board, a seized hinge, or a buried line the desert has slowly worked loose. For FAAC and BFT systems, we’ve serviced enough of them to know which parts are worth replacing and which aren’t.
Trusted Brands We Service in Boulder City
We’re certified to service nine major gate brands, and a few come up more than others around Boulder City. LiftMaster and Linear operators are common on the newer patio-home side of town. FAAC and BFT swing systems show up on properties that have been upgraded over the years, and Viking units turn up now and then on older automation. We don’t keep a local parts warehouse, so we don’t pretend to. What we do is diagnose correctly, order what’s needed, and turn the repair around fast. If you’re not sure what brand you have, we’ll identify it on site.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Boulder City Homes
- Fatigued original hinges on 1930s – 1950s wrought iron. Decades of desert sun dry out the hinge post, and the gate starts to sag at the pier instead of mid-panel. That’s the single most common failure on the older homes near the historic district.
- Warped vinyl and aluminum HOA gates binding on rollers. Summer dry heat warps the gate frame, and monsoon-blown sand jams the rollers until the gate drags. Track and roller cleaning plus a realignment usually solves it.
- Winter freezes cracking masonry piers and seizing hinges. Overnight freezes sneak up on legacy swing gates, and a hairline crack in a pier or a seized hinge turns into a gate that won’t move by morning.
- Control boards cooked by the heat. Automatic operators on older gates run harder through Boulder City summers, and the board is often the first thing to go. We test it before recommending a new unit.
Pricing for Gate Repair in Boulder City, NV
We quote the price before any work starts, and we don’t move it once we’re on site. Here’s what gate repair typically runs in Boulder City’s market:
| Repair | Typical Range |
|---|---|
| Hinge & post repair | $180 – $420 |
| Gate realignment | $150 – $350 |
| Automatic operator repair (board, rollers, photocells) | $220 – $650 |
| Electric gate repair (wiring, controls) | $200 – $600 |
| Weld & rust repair | $175 – $400 |
What pushes a job toward the top of the range is usually post work, buried-line locating, or a control board replacement. Hand-digging around old footings in the historic district takes more time than setting a post in open ground, and we price honestly for it. Estimates are free, and the 90-Day Done Right Promise is stamped in writing on every job. Call (844) 761-8729 for an exact quote.
We Also Serve Cities Near Boulder City
Boulder City is home base for this page, but we also work the surrounding areas – Henderson, Whitney, Paradise, and Enterprise among them. If you’re just outside Boulder City and need a hand, reach out and we’ll tell you honestly whether we can get to you. Our Gate Repair team covers the whole region.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Boulder City
In most cases the original hardware can be saved. The hinge and hinge post are what failed, not the ironwork itself, so a hinge replacement, post repair, and realignment usually get a 1940s gate swinging clean again for far less than new ironwork. Replacement only wins when the pier itself has cracked structurally or the iron has rusted through. We’ll tell you which one you’re looking at. Call (844) 761-8729 and we’ll take a look.
Because Boulder City’s historic district was platted in the 1930s as a federal company town, and many front-yard gates share their property line with old irrigation ditches and unmapped federal-era utility runs. Hand-digging lets us locate those before a shovel hits anything that matters. A truck-mounted auger could cut straight through a century-old line, and that’s a repair nobody wants to pay for. Hand-digging is slower, but it’s the only safe way to set a post here.
Usually it’s the control board, not the whole operator. Summer heat is brutal on electronics here, and the board is often the first thing to fail while the motor and gearbox are still fine. We test the board, the safety photocells, and the drive before recommending a replacement. If the motor’s shot too, we’ll say so plainly. Call us for an honest diagnosis before you buy a new unit.
Yes. Any automatic gate that moves on its own should have working entrapment protection, and older installations often don’t. Photocells and safety edges are what keep a gate from closing on a person, a pet, or a car, and they’re not optional on a functioning automatic gate. If your older operator is running without them, that’s a real safety gap worth fixing. Call (844) 761-8729 and we’ll check what you have.
Monsoon-blown sand is the culprit. Out toward the 89005 edges, wind-driven sand packs into the rollers and track until the gate binds, and the operator works harder than it should trying to push through. The fix is track and roller cleaning plus a rack-and-pinion and photocell check, not a new operator. Regular cleaning keeps it from coming back. Call us for a service visit and a free estimate.
Gate problems in Boulder City don’t fix themselves, and they rarely get cheaper with time. Whether it’s a sagging 1940s wrought-iron gate on a masonry pier, a jammed slide gate out near the 89005 edges, or an operator that quit after the last summer, we’re ready to take a look. Our Gate Repair in Boulder City team answers the phone around the clock, quotes the price before any work starts, and stands behind every job with the 90-Day Done Right Promise. Call (844) 761-8729 for a free estimate today.
Written by the team at Gatewood Fence & Gate Sunrise Manor.