Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Henderson
If your driveway gate won’t open, a slide gate has jumped the track in Anthem, or your keypad stopped responding after another Mojave summer, we’re the call to make in Henderson. We repair electric and automatic gates, reset sagging hinge posts, realign tracks, and fix locks and rusted weld joints for homeowners from Green Valley and MacDonald Ranch out to Seven Hills and the hillside parcels off Sun City Anthem. A live person answers when you call (844) 761-8729, and a Henderson location is usually reachable the same week you call – often the same day for a gate that’s stuck open.
Why Gatewood Fence & Gate Sunrise Manor Is Henderson’s Preferred Gate Repair Company
We show up because the work is on site. Gates get welded and re-anchored in the driveway, not hauled off to a shop where they sit for two weeks. That matters in a spread-out city like Henderson, where the sun, the caliche, and the HOA all have opinions about how your gate should look and shut.
We service nine major gate brands – LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule – and we carry the diagnostic gear to tell you whether you’re looking at a dead control board or a footing that’s let go. Every repair is backed by the 90-Day Done Right Promise, stamped in writing on the job. If it comes back faulty, one call brings us out to make it right. Our techs bring up to 25 years of experience to every call, including the ones where a prior outfit quoted one price on the phone and charged another at the door.
Henderson customers keep us busy because gates fail here for reasons a national operator doesn’t always account for. UV bakes control boards. Caliche heaves posts. Grit packs into rollers. We work these problems every week, and we’ll tell you straight what’s wrong and what it takes to fix it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Henderson
Electric Gate Repair
When an electric gate quits in Henderson, it’s usually the control board or keypad giving up under sun exposure before the mechanical parts wear out. We test the operator, the safety photocell, and the power run before we replace anything, and we weld and re-set the frame on site rather than swapping parts that tested fine.

Automatic Gate Repair
Automatic gates across Henderson’s 1990s – 2000s subdivisions – especially the builder-grade LiftMaster and Linear swing units in Green Valley and MacDonald Ranch – are now hitting the 10 – 15 year mark where the electronics fail together. We pull the panel cover, read the fault codes, and check whether the operator is failing or the gate itself has drifted out of alignment.

Hinge & Post Repair
A sagging swing gate usually fails at the hinge post, not the panel – so we start at the anchor and work outward. In Anthem and Seven Hills hillside builds, that can mean re-pouring a deeper, wider footing; in a flat Green Valley tract home, it’s often just worn hinges or a thin shim of adjustment.

Gate Realignment
Slide gates that jump the track in Henderson are a footing problem more often than not. Original undersized anchors lift out of the caliche soil as it heaves season to season. We re-set the posts before we touch the operator – fixing the panel without the post means you’ll fix it twice.
Trusted Brands We Service in Henderson
We’re certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking – the operators you’ll most often find on automatic driveway gates built in Henderson’s master-planned communities. If your unit is a LiftMaster, DoorKing, Elite, Ghost Controls, or Mighty Mule, we can diagnose it too. When a part needs ordering, we tell you the turnaround before you commit, and we don’t pretend to keep a full parts inventory sitting in a Henderson warehouse. What we do keep is a fast turnaround on the diagnostics so you know what you’re dealing with.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Henderson Homes
- Sun-baked operator electronics. Control boards, keypads, and safety photocells fail after 10 – 15 years under Mojave UV, especially on builder-grade units in Green Valley and MacDonald Ranch. Afternoon sun cooks the plastic sensor housings until they crack and short.
- Caliche-heaved post footings. The dense desert soil under most Henderson subdivisions expands and contracts with the day-night thermal swing. Slide gates jump track and swing gates sag at the hinge post when the original anchors lift.
- Grit-seized rollers and hinges. Windblown desert grit packs into HOA-mandated wrought-iron gate hardware and seizes rollers over a single summer season. Regular adjustment prevents most of these.
- Thermal swing-arm loosening. The extreme day-highs and overnight-cooling swing expands and contracts steel gate hardware until swing arms, brackets, and slide bolts work themselves loose each season.
Pricing for Gate Repair in Henderson, NV
A typical electric or automatic gate repair in Henderson runs $180 – $420 depending on whether you’re looking at a control board, a keypad, or a safety photocell. Hinge and post repair runs $220 – $650 when we re-anchor a footing, and gate realignment sits in the $150 – $380 range for a standard residential slide gate. A basic lock or roller replacement is often under $150. What moves the number is whether the gate itself needs re-setting before the operator can be fixed, which is a footing question, not an electronics question. Every job is quoted and agreed before work starts – the price on the estimate is the price on the invoice. Call (844) 761-8729 for a free estimate; we also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Henderson
We take gate repair calls beyond Henderson too – Boulder City, Whitney, Paradise, and Enterprise are all within reach. If you’re not sure whether your address is inside our service area, call and ask. Our Henderson gate repair calls and nearby-city calls get the same upfront pricing and the same 90-Day Done Right Promise.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Henderson
Because so much of Henderson was built in the same 1990s – 2000s window, the builder-grade operators and gates installed in those subdivisions are all reaching end-of-life together. Green Valley, Anthem, and Seven Hills went up in waves, so UV-exposed control boards and keypads on those units wear out on nearly the same schedule. Call (844) 761-8729 and we’ll tell you whether yours is a board or a footing problem.
Caliche-heaved original post footings are the usual culprit in Anthem, not a worn track. The dense desert soil under the subdivision expands and contracts with the temperature swing, and the original undersized anchors lift enough to throw the gate off the rail. We re-pour a deeper, wider footing before we touch the operator. Call for a free second opinion on any estimate you’ve already got.
Usually yes, but the power and conduit runs are what determine whether it’s straightforward or not. On a Henderson gate installed manual, there’s often no power at the gate – so the run has to be planned, and the footing checked before the operator is ordered. This is scheduled work, not same-day. Call (844) 761-8729 for a free measure and a written price.
UV degrades the plastic housings on keypads and photoelectric sensors faster here than in cooler climates – often within 10 – 15 years on a builder-grade unit. Cracked housings let in grit and moisture, and the sensor starts tripping or failing to trip at all. If your keypad is on its second or third summer with a cracked lens, call us at (844) 761-8729.
Automatic gates need functioning entrapment protection – typically photoelectric sensors and, on many residential slide and swing operators, a loop detector or edge sensor. We test those on every automatic gate repair call. If a safety component is missing or bypassed, we flag it before we return the gate to service.
Henderson gate problems are usually solvable on site the same week you call. Give us a ring at (844) 761-8729 for a free estimate – upfront pricing, no trip charge inside the county, and every job covered by the 90-Day Done Right Promise in writing. If you want the full picture of everything we fix, our Gate Repair team is the place to start.
Written by the team at Gatewood Fence & Gate Sunrise Manor.