Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Whitney
If your gate has stopped opening smoothly, or your keypad entry has gone quiet, we can help. We know Whitney’s 1980s and ’90s subdivisions on the east side of the valley, and we know what goes wrong in them: builder-grade operators worn out by 110°F summers, slide tracks packed with fine desert grit, hinge posts that have been leaning for a decade. A live person answers our line around the clock, and every repair comes with our 90-Day Done Right Promise in writing. Call (844) 761-8729.
Why Gatewood Fence & Gate Sunrise Manor Is Whitney’s Preferred Gate Repair Company
We’re locally owned and owner-operated, which matters more than any ad in a search result. Our technicians have up to 25 years of experience, and they show up when they say they will. That’s the whole pitch, and it’s why Whitney homeowners keep calling back.
Our truck stock is not a parts warehouse, so we don’t promise we’ll have every obsolete board on hand. What we do promise is a straight answer about whether your unit can be repaired or needs replacing, and a plan to get it working again fast. For Whitney, that often means a next-day visit once we’ve confirmed what model you’re running.
We also know the local terrain. We’ve worked on gates from the block-wall subdivisions near Sam Boyd Stadium up through the neighborhoods along East Lake Mead Boulevard, and we can usually tell from your description alone whether it’s a dust-jammed track or a control board that cooked in July.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Whitney
Automatic Gate Repair in Whitney
Most automatic gates in Whitney run on builder-grade operators from the 1990s, and those units are now 25 to 35 years old. Control boards degrade from the heat, gears wear down, and replacement parts for a lot of those models stopped being manufactured years ago. We’ll test the operator, the safety photocell, and the limit switches before we tell you anything. If it’s an obsolete unit, we’ll walk you through a modern replacement that can actually handle Whitney summers.

Electric Gate Repair in Whitney
Retrofitted gates are a frequent headache here. A homeowner adds an operator to an old manual gate, but nobody ran proper conduit or pulled a dedicated circuit out to the gate post. The result is nuisance tripping, voltage drop, and unsafe wiring. Electric gate repair in Whitney runs $150 to $650 for most jobs, and we’ll trace the whole run rather than just swap a fuse and leave.

Hinge & Post Repair in Whitney
A gate sags in the hinge post, not in the middle, and that’s where we start. In Whitney’s older subdivisions the original posts were set decades ago and have shifted with the soil. We can weld hinge brackets on site, reset a post, or reinforce the mounting, and the gate stays in your driveway while we do it. Hinge and post repair typically lands between $180 and $450.

Gate Realignment in Whitney
When a gate drags, scrapes, or won’t latch, realignment is often the fix. The dry dust blowing in off the open desert east of Whitney packs into rollers and hinges, and that grit throws the gate out of line. We clear it, lubricate with a dry product that won’t attract more dust, and adjust the gate back to true. Realignment usually runs $120 to $320.
Trusted Brands We Service in Whitney
We’re certified to service nine major gate brands. In Whitney, the units we see most often are older Linear and DoorKing operators, plus a good number of Viking swing operators still running on original boards. We also handle LiftMaster, FAAC, BFT, Ghost Controls, Elite, and Mighty Mule. We don’t carry a parts warehouse, so if a board or gear set has to be ordered, we’ll tell you the lead time up front and schedule the return visit before we leave.
Common Gate Repair Problems We See in Whitney Homes
Here’s the pattern we see again and again in Whitney. A homeowner notices the gate moving sluggishly, or a keypad stops responding, and assumes the whole thing has to go. Usually it’s one of these:
- Heat-fatigued control boards. Whitney regularly tops 110°F in July and August. Those summers cook the electronics inside a builder-grade operator, and the board fails long before the motor does.
- Dust-seized rollers and tracks. The afternoon winds pick up fine grit from the open desert east of Whitney and drive it into every moving part. The gate doesn’t rust here, it gums up. We blow out the tracks and hinges with compressed air, then apply dry lubricant before we replace anything.
- Obsolete operator units. A 1990s operator with worn gears and no available parts is a replacement job, plain and simple. We’ll say so instead of chasing a repair that won’t hold.
- Undersized or missing power runs. Manual gates retrofitted with automatic operators often lack a proper conduit run and dedicated circuit, causing repeated electrical faults and unsafe conditions.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Whitney, NV
We quote the price and you agree to it before any work starts. No surprise invoice at the door. A typical hinge and post repair in Whitney runs $180 to $450, gate realignment is usually $120 to $320, and electric gate repair on a wiring or control issue lands around $150 to $650. If your operator is obsolete and needs full replacement, we’ll give you a written number for the new unit and installation after we’ve measured the gate and checked the power run. Estimates are free, and there’s a standing $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Whitney
Whitney is one of several east-valley communities we cover. You’ll find us in Sunrise Manor, Winchester, Paradise, and Las Vegas as well, so if you’re just over the line, call anyway. Read more about our Gate Repair service, or see how we handle Gate Repair in Whitney specifically.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Whitney
Because Whitney’s gate problems are heat and dust, not rust. The dry desert climate means metal doesn’t corrode the way it does in wetter parts of the country. Instead, UV exposure cracks plastic rollers, 110°F summers cook control boards, and fine grit from the afternoon winds seizes hinges and tracks. Call (844) 761-8729 for a free estimate.
It depends on the model. Many builders in Whitney’s 1980s and ’90s subdivisions used operators whose parts are no longer manufactured, so a repair often isn’t possible or won’t last. We’ll inspect the unit and tell you honestly which way to go before you spend anything. Call (844) 761-8729 for an exact quote.
Check whether the gate is physically jammed before you assume the motor failed. After a dust storm, fine grit from the open desert east of Whitney packs into rollers and track, and a gate that can’t move freely will trip the operator’s safety circuit. We blow out the tracks and hinges with compressed air, apply dry lubricant, then test the operator and photocell. Call (844) 761-8729.
Plan for the power run, because that’s where retrofits fail. A lot of Whitney homes added an operator to a manual gate without running conduit or a dedicated circuit to the post, which leads to voltage faults and unsafe wiring. A proper install means a modern operator (LiftMaster or FAAC both handle Whitney heat well), a clean conduit run, and working safety edges. It’s a scheduled job, not a same-day repair, so call (844) 761-8729 for a free measure and a written price.
Look at the post, not the gate. If the gate sags, check whether the post itself has shifted or the weld at the hinge bracket has cracked. Fix the panel without the post and you’ll fix it twice. We can weld on site in Whitney or reset the post, quoted and agreed before we start. Call (844) 761-8729.
Get Your Whitney Gate Fixed Right
If your gate is dragging, your keypad has gone dead, or your operator quit after the last heat wave, give us a call. A live person answers 24 hours a day, seven days a week, and the 90-Day Done Right Promise is stamped in writing on every job. Call (844) 761-8729 for a free estimate. We’ll get the person who knows gates out to your Whitney property, quote it straight, and leave your gate closing on its own.
Written by the team at Gatewood Fence & Gate.