Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Sunrise Manor Homeowners
A gate that won’t latch, drags on the concrete, or swings open on its own is a security problem first and a hassle second. We repair gates across Sunrise Manor, and most calls we get here are the same handful of failures: a hinge post that’s worked loose in our caliche-hard soil, a rusted bottom rail, or an opener that quit after a monsoon dust storm packed the track. We can usually get to you the same day, and the person who answers the phone is a live human, not a voicemail box.

Our technicians have up to 25 years of experience, and we repair all nine major gate brands, from LiftMaster to Mighty Mule. We’re owner-operated, so the name on the shop is the name on your invoice. Call (844) 761-8729 and tell us what the gate is doing. We’ll give you a straight answer on when we can be out.
What Our Gate Repair Service Includes
Gate repair isn’t one trade. A gate can fail at the hinge, the latch, the operator, the wiring, or the weld, and each one calls for a different fix. We handle all of it in one visit, and we’d rather repair what’s there than sell you a new gate you don’t need.
Electric Gate Repair
Electric gates fail for a short list of reasons: a control board fried by a brownout, a limit switch out of adjustment, a safety loop that thinks the driveway is full, or wiring chewed through by desert critters. When the gate stops responding to the remote or opening only halfway, the board and the photo-eye alignment are the first places we look. We diagnose the electrical side before touching anything mechanical, so you don’t pay for a part you didn’t need. If it’s a bad board or a dead transformer, we’ll tell you plainly and quote the repair before we start.
Automatic Gate Repair
Automatic openers take a beating in Sunrise Manor. The motor packs with fine dust, the battery backup dies quietly, and the arm starts grinding because the gate itself has dropped an inch and the opener is now lifting more than it should. If your gate opens slowly, jerks partway through, or won’t close at all, the opener may be fine and the gate out of alignment. We check the swing arc, the hinge line, and the operator as a system. That’s often the difference between a two-hour repair and a replacement quote you didn’t need.
Hinge & Post Repair
We’ve said it before and it holds: a gate sags in the hinge post, not in the middle. When a gate droops, drags, or won’t latch, the post has usually loosened in the ground or bent under years of weight. Repairing the panel without fixing the post means you’ll be back in a few months. We reset loose posts, weld hinge plates back to solid steel, and replace worn hinges, then confirm the gate swings true before we call the job done. This is the repair most homeowners actually need, even when the symptom shows up somewhere else.
Gate Realignment
Realignment is the work of getting a gate to swing straight and latch cleanly after it’s moved, settled, or been knocked out of square. A gate that closes on its own, rubs the ground at the latch end, or needs a shoulder to latch is out of alignment, and the cause is usually the posts or the hinges, not the latch itself. We measure the swing, check both posts for plumb, and adjust the gate back to square. Doing this right the first time is what keeps an opener from working itself to death on a gate that’s fighting it.
Lock Repair
A lock that sticks, spins freely, or won’t catch is a security problem, not a small annoyance. In our climate, dust and sun work on locks the same way they work on hinges, and a handle that’s been forced will strip the internal mechanism before long. We repair and replace latches, handles, and keyed locks on both swing and slide gates, and we check that the gate meets the lock cleanly. Please don’t force a jammed lock with a screwdriver; it usually turns a $60 fix into a bigger one.
Weld & Rust Repair
Rust starts at the bottom rail and the welds, where water sits and the powder coat wears through first. Left alone, a rusted weld becomes a structural failure, and a gate that snaps a hinge at the wrong moment is a real hazard. We weld on site so the gate stays in your driveway, cut out rusted sections and replace them with matching material, and finish the repair so it holds. If a gate is too far gone to repair safely, we’ll say so honestly rather than weld over rot that won’t last.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Brands We Service for Gate Repair
We work on the equipment that’s actually installed on Sunrise Manor gates. On LiftMaster operators, we know exactly where the drive gear and limit switches wear out, which is why we check mechanical wear before we replace a board. FAAC and BFT swing operators show up on a lot of the heavier residential gates, and their control logic and safety-edge wiring have their own quirks that we’ve handled enough times to diagnose quickly. Linear equipment is common on lighter gates, and its failure points are different again.
Spending time on the same systems means we can usually tell what’s wrong from a short conversation and a look at the gate, rather than guessing. A brand-new control board won’t fix a gate whose post has settled, and a fresh opener won’t fix a hinge that’s about to snap. Whether your gate runs LiftMaster, FAAC, BFT, or any other make, we can help.
Signs You Need Gate Repair Right Now
- The gate sags or drags on the ground. A gate that scrapes the driveway is usually telling you the hinge post has moved or the hinges are worn. Left alone, the dragging weight twists the frame and turns a hinge job into a post job.
- It opens or closes on its own. A gate that moves without a command, or reverses for no reason, is a safety issue, especially with kids or pets around. That points to a safety sensor, a limit switch, or a control board, and it needs a look before someone gets hurt.
- The opener sounds rough or stops partway. Grinding, clicking, or a gate that quits mid-swing usually means the operator is straining against a gate that’s out of alignment. Running it anyway wears the motor and the gears faster.
- The latch won’t catch or the lock won’t turn. A gate that won’t latch isn’t securing anything, and a forced lock is a stripped lock waiting to happen. This is a same-day fix in most cases.
- Rust or cracked welds at the bottom rail. Rust at the welds is a structural warning, not a cosmetic one. A weld that fails under load can drop a gate or snap a hinge, so it’s worth a look now.
Our Gate Repair Process – Step by Step
- 1
You call, a person answers. No phone tree, no dispatch queue. Tell us what the gate is doing and how it’s moving, and we’ll get a clear picture before we ever start the truck.
- 2
We diagnose on site. We check the posts, the hinges, the operator, and the wiring as one system. A level and a straight edge on the posts tell us more than a guess ever will, and we test the safety devices on every automatic gate.
- 3
You get a written price before we start. Upfront pricing, agreed before any work begins. No surprise invoice at the door, no “while we’re in there” add-ons you didn’t approve.
- 4
We repair, often welding on site. Where the gate can be fixed in your driveway, we fix it there, which keeps it out of a shop and back in service sooner. Every job is backed by our 90-Day Done Right Promise in writing: if it’s not right, we come back and make it right.
- 5
We test the gate with you. We cycle it, check the latch, confirm the opener’s force and safety settings, and walk you through what we did. If we spot something else that needs attention, we’ll tell you, but there’s no pressure to add it on.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Sunrise Manor?
Gate repair in Sunrise Manor usually runs $150 to $450, depending on what’s actually broken. A typical hinge and latch repair runs $150 to $250. Hinge and post reset work, where a post has to be re-set or a hinge plate re-welded, usually lands $200 to $400. Electric and automatic gate diagnostics and repair, including boards, limit switches, and safety sensors, commonly run $225 to $500 once parts are counted. On-site weld and rust repair typically runs $200 to $450 depending on how much section has to be cut out and replaced.

What moves the price: whether the post is involved (the biggest driver), the cost of any parts, whether the gate has to come off to be repaired, and how accessible the operator and wiring are. You avoid overpaying by getting the diagnosis right the first time and by repairing rather than replacing when the gate still has life in it. A free second opinion on any written estimate is always available, and we’ll tell you honestly if the quote you got is fair.
Every estimate from us is free and itemized. The price we quote is the price you pay, and we don’t start work until you’ve agreed to it. We also take $40 off any repair over $200, waive the trip charge inside the county, and give a permanent 10% discount to seniors and veterans. Nobody has to haggle for any of it.
Gate Repair Near Sunrise Manor – Our Service Area
We repair gates throughout Sunrise Manor and the surrounding east valley, including Gate Repair in Whitney and Gate Repair in Winchester, plus North Las Vegas, Las Vegas, and Paradise. Response times depend on the day, but we aim to be out the same day for most repair calls in the Sunrise Manor area, and we’ll tell you honestly when we can arrive. If you’re not sure whether you’re in our service area, call and ask.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Repair in Sunrise Manor
Gate repair is fixing what’s actually failed on a gate so it swings, latches, and secures the way it should, rather than replacing the whole gate. That covers the hinges and posts, the operator and electronics, the latch and lock, and the welds and rust. Most of the gates we see in Sunrise Manor can be repaired rather than replaced, and we’d rather do that when the gate still has good years in it.
Most repairs take one to three hours on site, and many are finished in a single visit. A hinge or latch fix is usually quick; a post reset, a control board replacement, or welding a rusted rail takes longer. If we find something that needs a part we don’t have on hand, we’ll tell you the timeline before we leave. Call (844) 761-8729 for a realistic estimate on your gate.
Most gate repairs in Sunrise Manor fall between $150 and $450, with electrical and operator repairs sometimes running higher depending on parts. The final price depends on whether a post is involved, the parts needed, and the access to the operator and wiring. We quote and agree the price before any work starts, so there are no surprises. Call (844) 761-8729 for an exact quote. Estimates are free.
Yes. We service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We work on the control logic, safety devices, and mechanical parts specific to each brand. If you’re not sure what you have, tell us the model or send us a photo and we’ll sort it out.
Often yes, and a live person answers the phone around the clock, so call any time, day or night. A gate stuck open, a gate that won’t secure, or an opener that’s failed is a security concern, and we treat it that way. We’ll give you a real arrival window, not a vague “sometime today.” Call (844) 761-8729 and we’ll find the soonest slot.
Every job carries our 90-Day Done Right Promise, in writing. If the repair isn’t right, you call us and we come back and make it right, no runaround and no hedge language. The promise is stated plainly on every invoice, not buried in fine print. Call (844) 761-8729 with any warranty question before or after the work.
Clear the driveway and the area around the gate so we can swing it freely and reach the operator. If you have the opener manual, the model number, or the original installation paperwork, set it out, since it speeds up the diagnosis. Note when the problem started and whether it’s worse at certain times of day. Beyond that, there’s nothing to do; we bring the tools, and most work happens on site in your driveway.
Schedule Your Gate Repair Service in Sunrise Manor Today
If your gate is dragging, sticking, or won’t secure, don’t wait for it to fail at the worst moment. Call (844) 761-8729 for a free estimate. A live person answers 24/7, the price is agreed before any work starts, and every repair is backed by our 90-Day Done Right Promise. We’ll come out, tell you straight what’s wrong, and fix it right.
Written by the team at Gatewood Fence & Gate Sunrise Manor.