Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Access Control for Sunrise Manor Homeowners
If the keypad on your gate has gone dead, the clicker only works when you’re three feet away, or the gate swings open for anybody who pulls up, that’s an access control problem, and it’s worth fixing properly. Gate access control in Sunrise Manor covers the equipment that decides who gets in: keypads, remotes, phone entry, card readers, video intercoms, and smart systems. Our technicians have up to 25 years of experience, and every job carries our 90-Day Done Right Promise in writing. We answer the phone with a live person around the clock, so call (844) 761-8729 whenever it suits you.

What Our Gate Access Control Service Includes
Access control is the part of the gate most people notice and least understand. It’s rarely one box that fails; it’s usually a keypad that’s been rained on for a decade, a receiver that lost its programming, or a reader that no longer talks to the controller. Here’s how we handle each piece.
Keypad Entry
A keypad is the workhorse of gate access, and it’s the piece we get called about most in Sunrise Manor. When a code stops working, the fault is often the keypad’s membrane or its wiring to the controller rather than the controller itself, and we test both before we touch anything. We repair the existing unit where it makes sense and replace it when the contacts have simply worn through, then reprogram every code you need. We’ll also walk you through changing codes yourself, because you shouldn’t have to call us for that.

Remote Control
Remotes that only work up close, or that quit after a battery change, are usually a receiver or antenna problem rather than a remote problem. We check the receiver board, the antenna run, and the remote’s programming, then re-pair the remotes and test range from the street. If you’ve bought a handful of cheap remotes over the years and none of them behave, that’s a clue the receiver is the culprit, and we’ll show you what we find.

Phone Entry
Phone entry lets a visitor ring through to your phone and lets you open the gate from wherever you are. It’s a good fit for a home where a family member works odd hours or where a delivery or caregiver needs in when nobody’s at the door. We set up the call routing, test it end to end from the gate, and make sure the person on the other end of the call can actually hear you.

Card Reader
Card readers make sense when you have regular, known users: a rented casita, a caregiver, a landscaping crew, a home business with a steady stream of people. We install and service proximity readers and the software that manages them, and we make sure a lost card can be cancelled the same day. Sunrise Manor properties on larger lots often benefit from this over passing out remotes to everyone.
Video Intercom
A video intercom lets you see who’s at the gate before you open it, which matters on a property where the gate sits far from the front door. We service and install camera-and-speaker stations, check the picture in daylight and after dark, and confirm the audio works both ways. If the picture goes fuzzy every summer afternoon, that’s sun angle and camera placement, and we can usually improve it without replacing the unit.
Smart Access
Smart access ties your gate to an app or a smart-home system so you can open it, check its status, or hand out temporary access without a ladder and a keypad. We work with the controllers that support it and make sure the app and the gate actually agree with each other before we leave. We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the odds are good we’ve worked on your setup.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Brands We Service for Gate Access Control
We’re certified to service nine major gate brands, which means we’ve opened the same controllers and keypads hundreds of times and know where they wear. LiftMaster equipment is common on residential swing gates around Sunrise Manor, and its receivers and remotes are straightforward once you know the pairing sequence. FAAC operators show up on heavier gates and have their own quirks in the control board and limit settings that we’ve learned to read quickly. We also work on BFT and Linear systems regularly, and the access control pieces that hang off them.
DoorKing is the brand we see most on gated communities and shared driveways, and its entry systems reward careful programming over guesswork. Viking and Ghost Controls are common on lighter residential gates, and we know which keypads and receivers pair cleanly with them. Whether you have LiftMaster, FAAC, BFT, Linear, or any other make, we can help, and we’ll tell you honestly when a repair is the right call and when a replacement is.
Signs You Need Gate Access Control Right Now
- The keypad lights up but the gate won’t open. That pattern usually points to a failed relay or a broken wire between the keypad and the controller. It’s a quick diagnosis, and leaving it means everyone’s using the manual release instead.
- Your remotes only work when you’re close. Range shrinks as the receiver weakens or the antenna gets damaged or moved. It looks like a remote problem, but it’s almost always on the gate controller end, and it gets worse over time.
- The gate opens for anyone who walks up. A stuck relay or a mis-set entry mode can leave the gate effectively unlocked. That’s a security problem worth a same-day look, and it’s the kind of call we answer around the clock.
- A card or code that should work doesn’t. When one user stops working but others are fine, it’s usually a programming issue, and we can sort it out before it turns into a lockout. If everyone stops working at once, suspect the controller.
- You can’t hear or see visitors at the gate. A video intercom that’s gone dark or a phone entry that won’t ring means you’re opening the gate blind. We test the audio, the camera, and the call routing to find where it’s dropping.
Our Gate Access Control Process – Step by Step
- 1
We answer the phone, live. No voicemail, no queue, no chatbot. Tell us what the gate’s doing and what kind of access control you have, and we’ll tell you what we expect to find and what it’s likely to run.
- 2
We come out and diagnose on site. We start at the gate and work back: keypad, wiring, receiver, controller. We test each piece with a meter and with the operator itself, so we’re fixing the failing part rather than guessing.
- 3
We give you the price before any work starts. You’ll get the number in writing and we won’t start until you agree to it. No surprise line items at the end, ever.
- 4
We repair on site where we can. We do on-site welding and real repair, which means we fix the panel or the post rather than hauling the whole gate away. If a part has genuinely failed, we’ll show you what failed and why.
- 5
We test everything and leave you with the promise in writing. Every code, every remote, every call routing tested from the street. You get the 90-Day Done Right Promise stamped on the job, and one call brings us back if something isn’t right.
How Much Does Gate Access Control Cost in Sunrise Manor?
A typical keypad repair or replacement in Sunrise Manor runs $150 – $350 depending on the unit and the wiring condition, and a remote and receiver re-pair is usually $95 – $200. Card reader and video intercom work tends to land between $300 and $800 installed, and phone entry setup runs $250 – $550 depending on the call routing. A full controller replacement with programming is the larger end, generally $600 – $1,200. Those ranges are honest ballparks, not a quote, and the exact number depends on the gate’s age, the wiring run, and which brand you have.

What affects the price most is whether the wiring is sound and whether the access control equipment is compatible with your operator. Mismatched brands cost more to bridge, which is one reason we ask what you have on the phone. You avoid overpaying by getting the diagnosis before the price, which we do as a matter of course. Every estimate is free, the price is quoted and agreed before any work starts, and we offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. We also give a free second opinion on any written estimate you’ve already got.
See the difference
Before
After
Before
After
Before
AfterGate Access Control Near Sunrise Manor – Our Service Area
We work gate access control across Sunrise Manor and the surrounding east valley, including Whitney, Winchester, North Las Vegas, Paradise, and Las Vegas. Farther out, we cover Henderson, Spring Valley, Enterprise, Summerlin, Boulder City, and Sandy Valley. Response times depend on the day, but we keep a live person on the phones around the clock so you’re never waiting to hear back. You can see what we do across the area on our home page, and if you’re comparing nearby options, our Gate Access Control in Whitney and Gate Access Control in Winchester pages cover the same work close to home. Not sure what kind of access control you need, or what’s actually failing? Ask us, and we’ll give you a straight answer.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Access Control in Sunrise Manor
Gate access control is the equipment that decides who can open your gate and how, including keypads, remotes and receivers, phone entry, card readers, video intercoms, and smart app-based systems. It sits between the visitor and the gate operator, and it’s the part that fails first because it’s the part people touch. If your gate opens but the access side is unreliable, that’s the piece we diagnose.
Most keypad and receiver repairs are done in a single visit, usually one to two hours on site. New card reader or video intercom installs can take longer because they involve wiring and setup, so we’ll give you a realistic window when you call. We don’t promise same-day on new installs, because those get measured and scheduled properly. Repairs we can often handle the same day if you call early.
Most access control repairs in Sunrise Manor run $150 – $350, and full controller replacement with programming generally runs $600 – $1,200. The range depends on your brand, the wiring, and whether the equipment is compatible with your operator. We quote and agree the price before any work starts, and estimates are free. Call (844) 761-8729 for an exact quote, and remember the $40 off any repair over $200 and the permanent 10% discount for seniors and veterans.
Yes. We’re certified to service LiftMaster equipment and know its receivers, remotes, and controllers well, and the pairing and programming sequences are second nature to us. We also service FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Tell us what you have when you call and we’ll tell you what to expect.
Yes. A live person answers the phone 24 hours a day, 7 days a week, so you can call at 11 p.m. if the gate won’t open or won’t stay shut. We’ll talk through what’s happening, and if it needs a visit we’ll get it scheduled, including emergency calls. We don’t hide behind a dispatch queue or a recording.
Every access control job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back and we make it right, with no runaround and no fine print to argue over. The promise is stamped on the job, not buried in a footer.
Have any remotes, codes, and cards you use ready so we can test them all, and note which ones stopped working and when. Make sure we can get to the gate and the keypad without moving vehicles, and if you know the brand and model, tell us when you call. If you have a written estimate from another company, have it handy, because we’ll give you a free second opinion on it.
Schedule Your Gate Access Control Service in Sunrise Manor Today
If your gate access control is unreliable, don’t wait for it to leave you locked out or leave the gate open all night. Call (844) 761-8729 and a live person will pick up, day or night. We’ll diagnose the problem, quote the price before we start, and back the work with the 90-Day Done Right Promise. Estimates are free and there’s no obligation. Give us a call.
Related Services
Access control is one piece of the gate, and it helps to know the rest. Our Gate Repair page covers hinges, posts, and panels, and our Gate Installation page explains what goes into a new gate. If the operator itself is the problem, see Gate Motor & Opener, and for fabrication and on-site welding, our Gate Parts & Welding page has the details.
Written by the team at Gatewood Fence & Gate.