A Gatewood company - serving Sunrise Manor, NV

Lock Repair in Sunrise Manor, NV

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Lock Repair in Sunrise Manor, NV

Lock repair in Sunrise Manor typically costs $95 to $220 depending on whether it’s a gate latch, a keyed lock cylinder, or an electric strike that’s quit working. Most of the calls we make here are same-day or next-day, and a fair chunk of them are locks that somebody else installed wrong the first time. If your gate won’t latch, the key won’t turn, or the lock only works when you lift the gate a half inch, that’s what we do.

Call (844) 761-8729 and a live person answers, day or night. Not a voicemail box, not a queue, not a chatbot. Tell us what’s happening at the gate and we’ll give you a straight answer on what it likely takes and what it costs before anybody shows up.

Gatewood Fence & Gate Sunrise Manor handles Gate Repair and everything underneath it, locks included. On-site welding means the gate stays in your driveway while the work happens, and every job carries the 90-Day Done Right Promise in writing. If it’s not right three weeks later, one call brings us back.

When You Need Lock Repair

Sunrise Manor sits out in the valley where the wind and the heat do their work on gate hardware year after year. The problems we see repeat themselves, and they usually show up in one of these forms:

  • The key turns but nothing happens. The cylinder spins free because the tailpiece has snapped or worn round. Common on keyed gate locks that have seen a few thousand cycles.
  • The gate won’t latch unless you lift it or shove it. That’s almost never the lock. It’s the gate sagging in the hinge post, which throws the lock out of alignment with the strike. No amount of lock adjustment fixes a gate that has dropped.
  • The electronic lock or keypad stopped releasing. On gates running LiftMaster or FAAC, the lock and the operator talk to each other. If the strike doesn’t release when the motor cycles, the issue could be the lock, the wiring, or the control board. We test all three before quoting anything.
  • The latch is loose, wobbly, or missing screws. Wood and metal gates both work their screws loose over years of slamming in the heat. Sometimes it’s a five-minute fix with the right hardware. Sometimes the mounting plate has pulled through and needs welding.
  • Somebody drilled the wrong holes. We get called out to more of these than you’d think – a previous company or a homeowner mounted a replacement lock without checking the backset, and now the latch doesn’t reach the strike. Hand us a gate with holes in the wrong place and we can usually make it work without replacing the gate.
  • The lock is seized or the key has worn out. Desert grit gets into a cylinder fast. Sometimes a proper cleaning and lubrication gets it back. Sometimes the cylinder is past saving and needs replacing.

If any of that sounds familiar, it’s worth a call. Most lock problems that we see in Sunrise Manor are visible within the first five minutes of standing at the gate.

Our Lock Repair Process

Here’s how a lock repair actually goes when you call us out:

  1. We look at the whole gate, not just the lock. A gate sags in the hinge post, not in the middle – and that’s where we start. If the gate has dropped, no amount of lock work will hold. We check the post, the hinges, and the alignment with the strike before we touch the lock itself.
  2. We diagnose the lock properly. Keyed, keypad, electric strike, or mechanical latch – each one fails in its own way. We test the cylinder, the tailpiece, the latch bolt, and any wiring back to the operator. If it’s a brand we service – LiftMaster, FAAC, BFT, Linear and five others – we know the failure patterns before we open the housing.
  3. We give you a straight number before we touch anything. No haggling, no surprises at the door. If the honest answer is that the gate needs a hinge adjustment before the lock, you’ll hear that on the first visit, not after we’ve charged you for a lock.
  4. We repair and weld on site if the fix calls for it. Pulled mounting plates, stripped hardware, hairline cracks around the lock cutout – we weld right there in your driveway. The gate doesn’t get hauled off and it doesn’t sit in a shop for a week.
  5. We test the gate under real conditions. Show me the gate closing on its own and I’ll show you where it’s failing. We open, close, and lock the gate ten or twenty times before we call it done. If it doesn’t work smoothly, we haven’t finished.
  6. We back it up in writing. Every repair gets the 90-Day Done Right Promise stamped on the invoice. If the same lock fails within that window, we come back and make it right. That’s the whole promise, no fine print underneath it.

Lock Repair Pricing in Sunrise Manor

Nobody likes calling a gate company because they’re afraid the number will change when the truck pulls up. Here are the numbers we quote, and we hold to them:

Service Typical Range
Latch adjustment (alignment with strike) $95 – $145
Lock cylinder replacement $130 – $195
Electric strike or keypad lock repair $175 – $340
Welding repair at lock mounting plate $150 – $300
Full lock and hinge realignment $160 – $280
Parts (hardware, cylinder, strike) Cost plus a small markup – quoted before install

What moves the number up or down: whether the gate has sagged, whether the lock is mechanical or electronic, and whether the mounting hardware is welded or bolted. Older gates in Sunrise Manor with bolted hardware often need a small weld repair that a newer gate wouldn’t. We don’t quote until we’ve looked at all three.

Standing offers that don’t require you to haggle:

  • $40 off any repair over $200. Just mention it when you call.
  • No trip charge inside Clark County. Sunrise Manor is inside the county, so you won’t see a travel fee.
  • Free second opinion on any written estimate. If another company has quoted you a replacement lock or a new gate, bring us the paperwork. We’ll tell you honestly whether the work is needed.
  • 10% permanent discount for seniors and veterans. No expiration, no fine print, no annual renewal.

Free estimates are the default. We’d rather spend fifteen minutes at the gate than have you pay for a diagnostic visit and then feel pressured into work you didn’t want.

What Locks We Service in Sunrise Manor

Gate locks run the range from a simple gravity latch to a networked keypad that logs every entry. Most of the residential work we do in Sunrise Manor falls into one of these categories:

  • Mechanical gate latches – the spring-loaded kind that drops into a strike plate. Simple, reliable, and the first thing to fail when the gate sags.
  • Keyed cylindrical locks – deadbolts and key-in-knob locks mounted in the gate frame or a fixed post.
  • Electric strikes – the lock releases when the operator gets a signal. Common on LiftMaster and FAAC installations.
  • Keypad and card-reader locks – standalone units or integrated with Linear and BFT access control systems.
  • Self-latching and gravity latches – no key, no wiring, but they need the gate to swing true or they won’t catch.

If you have a brand not on the list above, call anyway. There’s a good chance we’ve worked on it, and if we haven’t, we’ll tell you straight instead of guessing.

Why a Gate Lock Fails Here in Sunrise Manor

Sunrise Manor has more wind than most of the valley, and it comes with grit that finds its way into every lock body eventually. We also see wild temperature swings between a 110-degree afternoon and a 55-degree night, which works the metal of the gate frame against the lock hardware year after year. Screws walk out. Welds hairline-crack. Cylinders get stiff before they seize.

The other thing we see, honestly, is sloppy work from a previous company. Gates where a lock was swapped without checking the backset, latches held on with the wrong screws, mounting plates welded onto metal that was too thin. If you’ve hired someone who did the job in a hurry, we can usually tell within a minute of looking at the hardware. That’s not a sales line – it’s just what we see.

If you suspect the previous work is the problem, see our full page on Gate Repair in Sunrise Manor for what a proper repair looks like. You can also start from our home page to see everything we do.

FAQs – Lock Repair

How much does gate lock repair cost in Sunrise Manor?

Most lock repairs in Sunrise Manor run $95 to $220, with electric strike and keypad work running $175 to $340. A simple latch adjustment is often the low end because the problem is alignment, not the lock itself. Welding at a pulled mounting plate runs $150 to $300. Call (844) 761-8729 for an exact quote – estimates are free and there’s no trip charge inside Clark County.

Can you repair a gate lock the same day?

Most days, yes. We schedule same-day and next-day for lock repairs in Sunrise Manor when the call comes in before mid-afternoon. If the repair needs parts we don’t carry – a specific cylinder or a hard-to-source strike – we’ll tell you when we book the visit and give you a realistic window. Calls are answered by a live person around the clock, so late-evening calls get a real answer.

Is it cheaper to repair the lock or replace it?

Repair is almost always cheaper than replacement, and it’s the honest answer most of the time. A cylinder that’s stiff from grit can often be cleaned and lubricated for well under $100. A latch that won’t catch because the gate has sagged needs the hinge fixed, not a new lock. We look at the whole gate first so you’re not paying to replace parts that were never the problem. If replacement really is the answer, we’ll tell you.

What should I check before calling for lock repair?

Open and close the gate by hand a few times and see if it swings where it’s supposed to without lifting. Then try the lock: does the key turn but nothing engages, or does the key not turn at all? If the lock only works when you lift the gate, the problem is alignment, not the lock. If the keypad works sometimes and not others, the problem is usually wiring or the control board. Either way, call (844) 761-8729 and describe what you’re seeing – we’ll tell you what’s likely and what it typically costs before anyone comes out.

Get the Gate Lock Fixed Right

Gatewood Fence & Gate Sunrise Manor has been locally owned and owner-operated since 2001. The shop’s address and license number are published, every invoice carries the 90-Day Done Right Promise, and calls are answered by a live person 24/7. If you’ve been burned by a national outfit before, we understand – that’s why we quote upfront and put the guarantee in writing.

Call (844) 761-8729 for a free estimate on lock repair in Sunrise Manor. We’ll show up in the window we promise, look at the whole gate before touching the lock, and tell you honestly what it takes.

Written by the team at Gatewood Fence & Gate Sunrise Manor, serving Sunrise Manor.

Need Gate Repair help in Sunrise Manor? Licensed & insured · same-day response · free estimates
Call (844) 761-8729
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Gatewood Fence & Gate Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch