Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Henderson
If you live in Henderson, NV and your old gate has finally quit, you already know the hard part isn’t picking a new one. It’s the tight driveway, the HOA rulebook, and the fact that the side yard isn’t wide enough to swing a cat. We install driveway, pedestrian, sliding, swing, double and security gates all over Henderson, from the 89015 blocks near Water Street to the hillside lots above Anthem. Much of our installation work is scheduled instead of same-day, because a new gate gets measured, ordered and set on a date we agree to up front. Calls are answered by a live person around the clock. For a free estimate, call (844) 761-8729.
Why Gatewood Fence & Gate Sunrise Manor Is Henderson’s Preferred Gate Installation Company
Henderson homeowners get burned the same way everywhere: a phone quote that grows legs by the time the truck pulls out. We don’t play that game. The price gets measured, written down and agreed before any work starts, and the 90-Day Done Right Promise is stamped on the job in writing. One call brings the person who did the work back. No runaround, no voicemail.
Our technicians have up to 25 years of experience, and they know this ground. A gate on a flat Green Valley tract lot fails differently than one perched on a slope in Seven Hills, and we plan the job around which one we’re standing on. We’re locally owned and owner-operated. The name is on the shop and on every invoice, and the phone is answered by a live person, day or night.
We install gates in the 89002, 89009, 89015 and 89052 ZIP codes and keep the schedule honest: we tell you a window and we show up in it. Standing offers take the haggling out of it, including $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. When a Henderson customer calls for Gate Installation, this is the outfit that picks up.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Installation Services in Henderson
Sliding Gate Installation
A sliding gate is usually the answer when the driveway is short and a swing gate would smack the garage or the neighbor’s fence. On sloped Henderson lots the whole job comes down to the footing. Caliche is unforgiving, so we pour deeper, wider footings and set posts before the operator ever goes on. This is the sub-service we install most in Henderson’s hillside communities.

Swing Gate Installation
Swing gates suit the older mid-century homes near downtown Water Street and Boulder Highway, where the hardware is different and the clearances are tighter. We check the hinge post first, because a gate sags in the hinge post, not in the middle. Set that post right and the gate swings true for years.

Driveway Gate Installation
Most Henderson driveway gates are HOA-mandated wrought iron or ornamental steel, and the association usually has an opinion about height, finish and style. We measure your opening, match the existing stucco block walls, and pre-assemble the panel off-site when the driveway is too tight to build in place. Vehicle access stays live during the job.

Pedestrian Gate Installation
Courtyard and side-yard walk gates in Henderson’s master-planned communities take a beating from the sun. We hang pedestrian gates with hardware rated for the heat and set the latch so it doesn’t drift out of alignment the first summer.
Trusted Brands We Service in Henderson
We’re certified to service LiftMaster, FAAC and Linear operators, along with nine major gate brands in all. We don’t carry parts on a truck, so call ahead and we’ll tell you honestly whether a replacement operator for your driveway is a quick order or a longer lead time. What we won’t do is swap out a working operator because a control board failed. If the board is sun-fried and the motor is fine, that’s what we say.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Henderson Homes
- Caliche heaving the footings. Henderson’s caliche-heavy desert soil expands and shifts with the seasons. On undersized post footings, that movement cracks the base and knocks a slide gate off its track, or binds a swing gate at the hinge.
- UV cooking the electronics. The sun here degrades operator control boards, keypad entry systems and safety photocells far faster than in cooler markets. Intermittent failures and dead keypads are a regular call.
- Windblown grit in the moving parts. Desert dust seizes rollers and hinges and chews up rack and pinion drives. Left alone, that wear sags a swing gate and misaligns a slider.
- Builder-grade gates hitting end-of-life together. Henderson’s 1990s-2000s subdivisions put thousands of steel gates and operators in the ground at once. Many are now past the 15-to-20-year mark, and the gate and the operator tend to fail in the same season.
Here’s the one true Henderson problem, though. Technicians working Anthem and Seven Hills routinely find sliding gates that jumped the track because caliche heaved two or three of the original undersized footing anchors. The fix is re-pouring deeper, wider footings and re-setting the posts before touching the operator at all. A gate on a flat Green Valley tract lot rarely has that problem; it usually just needs new rollers, a hinge-side adjustment, or a replacement control board. Same symptom, very different repair. When a builder-grade steel slide gate in a 1990s-era Green Valley subdivision stops responding, the usual culprit is a UV-degraded control board or a rack and pinion clogged with grit, and the smart start is testing the safety photocell and loop detector first. Which is why we don’t quote a gate installation in Henderson over the phone without seeing the soil and the slope.
Pricing for Gate Installation in Henderson, NV
Gate installation in Henderson runs roughly $1,400 to $3,200 for a standard driveway gate, hardware and labor included, with hillside footing work in Anthem or Seven Hills pushing toward the top of that range or above it. A pedestrian walk gate typically lands between $650 and $1,300. A sliding gate with an operator can run $2,500 to $6,000 depending on track length and electrical work. Manual swing gates sit lower; automated ones climb fast. The number that matters is written down and agreed before any work starts, so there are no surprises at the door. Estimates are free, and the second opinion on someone else’s written quote costs nothing. Call (844) 761-8729 for an exact figure.
We Also Serve Cities Near Henderson
We handle gate installation in Henderson and the towns around it, including Boulder City, Whitney, Paradise and Enterprise. Same measuring process, same written price, same 90-Day Done Right Promise stamped on every job. If you’re just outside the 89015, 89002, 89052 or 89009 lines, call and we’ll tell you straight whether your address is in the service area.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Henderson
Because caliche heaves undersized footing anchors and shifts the gate off its track. Henderson’s desert soil expands and contracts, and the original builder footings weren’t always poured deep enough for a slope. The repair means re-pouring deeper, wider footings and re-setting the posts before you touch the operator. Call (844) 761-8729 for a free estimate.
UV degrades operator control boards, safety photocells and keypad entry systems, and that’s the leading cause of premature electronic failure in Henderson. The housings crack and the circuit boards bake. A properly sized operator and a little shade go a long way. Call (844) 761-8729 and we’ll check yours before it quits.
Often you can’t, and a sliding gate is the better fit. Most Henderson HOA communities have limited rights of way, so a swing gate that would block a neighbor’s access usually fails the association’s review. We measure the opening, plan for restricted working space, and keep vehicle and pedestrian access live during the job. Call (844) 761-8729 for an exact quote.
The hinge post. A gate sags in the hinge post, not in the middle, and repairing the panel without addressing the post just means you’ll fix it twice. On older Henderson homes near Water Street that’s usually the whole problem. Call (844) 761-8729 and we’ll take a look.
Yes. Any automatic sliding or swing gate on a residential driveway needs safety edges or photocells, and Henderson installs need to meet the same code requirements as everywhere else in the county. We build that into every automated quote, not as an add-on. Call (844) 761-8729 for a free estimate.
Written by the team at Gatewood Fence & Gate.