A Gatewood company - serving Sunrise Manor, NV
Gate Parts & Welding in Enterprise, NV | Gatewood Fence & Gate Sunrise Manor - Gatewood Fence & Gate Sunrise Manor

Gate Parts & Welding in Enterprise - Fabricated to Fit, Priced Per Job

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Enterprise

When your gate stops working right, you don’t want a callback or a chatbot. You want a person who can look at it, tell you what’s wrong, and fix it in your driveway. We handle Gate Parts & Welding for homeowners across Enterprise, NV, and our technicians have up to 25 years of experience with the heat, the dust, and the aging iron that makes gates fail here. Call (844) 761-8729 and a live person answers, day or night.

Call (844) 761-8729

Why Gatewood Fence & Gate Sunrise Manor Is Enterprise’s Preferred Gate Parts & Welding Company

We’re locally owned and owner-operated, with a published address and license number anyone can look up. That means when we say the 90-Day Done Right Promise is stamped in writing on every job, it’s a promise somebody real is standing behind, not a warranty buried in fine print three clicks into a website. The name is on the shop, and the shop is down the road.

Enterprise homeowners call us because we weld on site. We’d rather fix the gate in your driveway than haul it off or swap parts that don’t need swapping. Fix the panel without the post and you’ll fix it twice. That repair-first approach saves real money, and it’s why people in Rhodes Ranch and Southern Highlands keep our number in their phone.

Response time to Enterprise is quick because we know these subdivisions. We’re familiar with the 1990s – 2010s builder-grade iron and operators that fill this part of the valley, and we quote the price before any work starts. No surprise number at the door. Calls answered by a live person, 24/7, because gates don’t fail on a convenient schedule.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Enterprise

Hinge Replacement in Enterprise

Heat-warped hinges are the number one call we get in Enterprise. After enough 110°F summers, decorative iron swing gates start to sag and drag, and that sag lives right at the hinge post, not in the middle of the gate. Replacing worn hinges and re-aligning the gate brings it swinging true again.

Hinge Replacement in Enterprise

Post Replacement in Enterprise

When a post has rusted through, bent from a monsoon wind gust, or worked loose in the caliche soil, no amount of bending the gate will fix it. We set a new post and weld the gate back to it so the whole assembly lines up the way it should. That’s the difference between a fix that lasts and a patch that fails by fall.

Post Replacement in Enterprise

Rail Repair in Enterprise

Rail repair covers the horizontal bars, frames, and top rails that take a beating from sun and dust. A bent or broken rail throws off alignment and makes the gate drag on the ground. We weld the repair on site so the frame stays square and the gate keeps its shape through the cold snaps and the heat cycles.

Rail Repair in Enterprise

Custom Welding in Enterprise

Custom welding is where our crew earns its keep. Adding a privacy panel, repairing a custom iron design, reinforcing a driveway gate for a heavier operator: we weld it in place, in your driveway, to your gate’s actual measurements. No hauling it off for a week. If you’re curious about the full range of work we do, our Gate Parts & Welding in Enterprise hub covers everything we handle locally.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 761-8729

Trusted Brands We Service in Enterprise

We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, and Linear. We don’t stock parts on a truck, so we measure, order the right replacement, and schedule the visit – which keeps the price honest and means the part that goes on your gate actually fits it. For operators and keypads, we service the brands Enterprise homeowners actually have, and turnaround is usually quick. If your operator has a name on it, we can probably work on it.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in Enterprise Homes

Enterprise isn’t a rust or frost climate, so the failures here look different from what you’d read about on a coastal repair site. These are the ones we see most.

  • Heat-warped hinges and UV-faded keypads. Decorative iron swing gates lose alignment and their entry keypads stop reading codes after years of intense sun. The plastic housing turns chalky and the buttons get stubborn.
  • Monsoon silt in the tracks and drive gears. Dust storms pack fine grit into slide gate tracks and rack and pinion, which jams the operator and can burn out a motor. Locals learn to rinse and relubricate tracks before the first 100°F week.
  • Builder-grade operator failures. In older tract homes, plastic gears and limit-switch cams give out after years of 110°F cycling. This is where the mix of aging subdivisions and desert heat really shows.
  • Wide driveway gates and heavy iron spans. Long driveways in the newer gated communities call for heavier operators built for the span. Undersized units burn up faster.

Here’s the one true local insight on this: Enterprise’s mix of 1990s – 2010s subdivisions means many original builder-grade gate operators are now 10 – 20 years old, and the 110°F summers plus monsoon dust accelerate failure of plastic gears and limit-switch cams more than coastal salt air ever would. That’s the pattern behind most of the calls we get here.

A typical scene: after a summer dust storm, a homeowner finds the slide gate stuck halfway. Fine silt has packed into the rack and pinion and the limit-switch cams of a builder-grade LiftMaster operator. A qualified technician rinses and relubricates the track, replaces worn rollers, and checks the loop detector and safety photocell alignment before the next hot stretch. If the gate is also sagging, the real fix is often at the hinge post, not the panel.

Pricing for Gate Parts & Welding in Enterprise, NV

Service Typical Enterprise range
Hinge replacement $120 – $260 per gate
Post replacement $350 – $650
Rail repair / welding $150 – $400
Gate roller replacement $100 – $220
Latch & lock work $90 – $200
Custom welding $200 – $600+

Those ranges reflect what this work actually runs in Enterprise. The total moves up with the size of the gate, whether the post has to be reset in the ground, and whether the operator needs work alongside the hardware. A standard hinge job often lands near the low end; a wide driveway gate needing a new post and re-weld sits higher. We quote the price and agree it with you before any work starts, so the number on the invoice is the one you already heard. Free estimates, and a $40 discount on any repair over $200.

We Also Serve Cities Near Enterprise

Enterprise sits just south of the Strip, and we work the surrounding valley too. If you’re nearby in Spring Valley, Paradise, Winchester, or Henderson, the same repair-first approach and the same written promise travel with us. Call (844) 761-8729 and tell us where the gate is; if it’s in the area, we’ll take a look. The 90-Day Done Right Promise comes with it.

Serving Enterprise, NV – Our Local Coverage Area

We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Enterprise

Why Enterprise Chooses Gatewood Fence & Gate Sunrise Manor

We set the standard for gate parts & welding in Enterprise.

30-60 Min Response

Fast dispatch across Enterprise. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Enterprise

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Enterprise - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically the same day.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Enterprise Customers Say

Trusted by homeowners across Enterprise and surrounding areas.

★★★★★

"He builds the gates himself. That is not something you can say about the outfits that just order a panel in."

Doreen Whitfield
★★★★★

"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."

Salvador Arredondo
★★★★★

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

Winston Achterberg

Ready for Gate Parts & Welding in Enterprise?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Enterprise.

(844) 761-8729

Request a Free Estimate in Enterprise

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch