Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Henderson
If your automatic gate stopped responding in Henderson, the fix usually comes down to two things: terrain and sun. On hillside lots in Anthem and Seven Hills, caliche-heavy soil heaves the original footing anchors and a sliding gate jumps its track. On flat Green Valley tract lots, a UV-baked control board or worn rollers is usually the culprit. We know which pattern we’re walking into before we open the panel, because we work Henderson driveways every week. Call (844) 761-8729 and a live person picks up, day or night.
Why Gatewood Fence & Gate Sunrise Manor Is Henderson’s Preferred Gate Motor & Opener Company
Henderson homeowners have been burned by plenty of national outfits that quote one number on the phone and charge another at the door. We’re the opposite. Every price is quoted and agreed before any work starts, standing offers don’t require haggling, and the name on the invoice matches the shop you can drive to. Our technicians have up to 25 years of experience, and they’re background-checked and uniformed on every Henderson job.
Response time to Henderson is quick because our people are working this valley daily. We cover ZIP codes 89015, 89002, 89052, and 89009, from Water Street and Boulder Highway out to MacDonald Ranch and the hillside builds above Seven Hills. Every job carries the 90-Day Done Right Promise in writing: if it’s not done right, we make it right. Standing offers include $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Key Takeaways
- Slide gate failures in Henderson often start with heaving footings, not the operator.
- Flat-lot swing gates usually point to a sun-fried board or a sagging hinge post.
- Upfront pricing agreed before any work starts, every time.
- 90-Day Done Right Promise stamped on every job.
- Live person answers the phone around the clock.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Henderson
Motor Installation
Installing a new motor in Henderson isn’t a same-day job, because it shouldn’t be. We measure the gate, check the footing and the panel weight, and order the right operator for the site. Tight Henderson lots and shared driveways often rule out a swing gate entirely, so a slide motor measured correctly the first time saves you a second install. LiftMaster and FAAC units are stocked through our supplier network, not carried on a truck. You’ll get a written price before we order anything.

Motor Repair
Repair-first is how we work. If a Linear operator can be rebuilt in your driveway, that’s what happens, rather than swapping out a whole unit that has years left. On Henderson swing gates, a sagging gate loads the hinge post and burns out the operator gear train. We correct the sag and re-anchor the post before touching the rack and pinion. On slide gates, the fix order matters too, and we’ll walk you through it.

Linear Motor
Linear operators show up all over Henderson’s 1990s and 2000s subdivisions. The boards and keypads on those units take a beating from relentless Mojave UV, so we frequently find cracked plastic housings and dead photocell lenses alongside the actual motor fault. We service Linear units on-site and can often rebuild rather than replace. Call for a free estimate.

Slide Motor
Slide motors are the workhorse on hillside Henderson lots where a swing gate won’t fit. In Anthem and Seven Hills, panel binding from caliche-driven footing movement is common, and the operator gets blamed for a track problem. We diagnose the footing before we touch the motor. If the original anchors were undersized, we re-pour deeper, wider footings and re-set the posts, then address the operator.
Battery Backup
Henderson power outages are short but real, and a dead gate in a shared driveway jams up the whole block. Battery backup keeps the panel moving so vehicle and pedestrian access stays open during the work and during outages. We’ll size the backup to your operator and gate weight. Free second opinion on any written estimate.
Intercom Integration
Gate access control on Henderson properties often means a keypad or intercom at the curb and a receiver at the gate. When those plastics crack under the sun, we replace the failing component rather than the whole system. We handle intercom integration alongside the motor and opener work so the two talk to each other properly.
Trusted Brands We Service in Henderson
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t stock parts locally, but we source fast through our supplier network, which means turnaround stays short even on a less common brand. When you call about a LiftMaster board or a Linear keypad, we know the unit and the failure pattern before we arrive. No-hassle upfront pricing, quoted and agreed before any work starts.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor & Opener Problems We See in Henderson Homes
- Sun-baked control boards and keypads. Mojave UV destroys operator circuit boards, entry pads, and safety photocell lenses far faster here than in cooler markets, so electronics fail years before the motor itself does.
- Slide gate panels jumping the track. Caliche heave lifts undersized original post footings on hillside Anthem and Seven Hills lots, and the panel binds or hops the rail. The operator usually gets blamed, but the footing is the real fault.
- Desert grit seizing rollers and hinges. Windblown grit works into moving parts and 100°F-plus day-night thermal swings loosen swing-arm and slide hardware mounts a little more each season.
- Swing gate sag burning out the operator. A gate that sags in the hinge post loads the operator gear train every cycle, and the sag gets worse until the motor quits.
Pricing for Gate Motor & Opener in Henderson, NV
Honest ranges for Henderson’s market. A typical motor repair runs $180 to $420, depending on the part and whether the footing is involved. A new slide motor installation usually runs $950 to $2,400, including the operator and hardware. Battery backup runs $250 to $650, and a keypad or intercom swap runs $150 to $350. What pushes a job toward the top of a range is footing work or a heavier gate. Every price is quoted and agreed before any work starts. Call (844) 761-8729 for a free estimate – estimates are free and trip charge is waived inside the county.
We Also Serve Cities Near Henderson
We also work the towns and neighborhoods around Henderson – Boulder City, Whitney, Paradise, and Enterprise. Same upfront pricing, same 90-Day Done Right Promise, same live person answering the phone. If you’re looking at a gate problem just outside our Henderson coverage, call and we’ll tell you straight whether we can help. Our Gate Motor & Opener team handles the full range of brands and setups across the valley.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Henderson
Because caliche heave is lifting the original post footings, not because the operator is bad. On hillside lots in Anthem and Seven Hills, undersized anchors move and the panel binds or hops the rail. The fix is re-pouring deeper, wider footings and re-setting the posts before the motor gets touched. Call (844) 761-8729 for an exact quote.
Faster than most homeowners expect, often years before the motor itself fails. The relentless Mojave UV degrades circuit boards, keypad plastics, and safety photocell lenses, so electronics are usually the first casualty on a Henderson gate. A shaded install buys more time. Call for a free second opinion on any written estimate.
Correct the sag and re-anchor the hinge post first, then address the rack and pinion. A gate that sags in the hinge post loads the operator gear train every cycle and burns it out, so replacing the motor without fixing the sag just repeats the failure. We quote the full repair before any work starts. Call (844) 761-8729.
Yes. Automatic gates need working entrapment protection, and sun-cracked photocell lenses are a common failure we find across Henderson, so we test that equipment on every service call. If the lenses are brittle or dead, we’ll flag it. Call for a free estimate on the sensor repair.
Yes, sized correctly to your operator and gate weight. Henderson outages are short but frequent enough that a dead gate in a shared driveway jams up the whole block, and battery backup keeps vehicle and pedestrian access open through the outage. We’ll tell you what size you need. Call (844) 761-8729.
Written by the team at Gatewood Fence & Gate Sunrise Manor.
Call (844) 761-8729 for a free estimate on your gate motor and opener in Henderson. A live person answers around the clock, pricing is upfront and agreed before any work starts, and every job carries the 90-Day Done Right Promise in writing.