Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Boulder City
Boulder City gates carry more history than most. Many of the iron and chain-link gates along the historic district are pushing 70 years old, and a lot of the newer HOA patio-home gates out toward the 89005 edges are just now hitting the age where rollers bind and vinyl warps. We repair both, and we weld on site so the gate stays on its hinges in your yard instead of getting hauled off. Boulder City is a short run for us, and a real person answers the phone around the clock. Call (844) 761-8729 and we’ll get you a straight answer, usually the same day.
Why Gatewood Fence & Gate Sunrise Manor Is Boulder City’s Preferred Gate Parts & Welding Company
The name is on the shop and on every invoice, which is about the oldest accountability there is. Our technicians have up to 25 years of experience, and every job carries the 90-Day Done Right Promise stamped in writing: if it’s not done right, we make it right, one call brings us back. That written promise matters more in Boulder City than most places, because the work here tends to be repair – rehanging a fatigued wrought-iron gate, resetting a post that has heaved, welding a rail back onto a masonry pier – rather than a full replacement someone else would try to sell you.
Boulder City customers have told us, more than once, that they called three outfits and got voicemail or a phone quote that doubled at the door. We do neither. A live person answers 24/7, and the price is quoted and agreed before any work starts. Our standing offers take the haggling out of it: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Response to Boulder City is quick – we’re just up the road – and because we know the historic district’s quirks, we show up expecting what’s actually in the ground instead of guessing.Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Boulder City
Our Gate Parts & Welding work covers the parts and the metal, in one visit, done on site. These are the four we get called for most in Boulder City.
Hinge Replacement
On 1930s and 1950s wrought-iron gates, the hinges are usually the first thing to fatigue – the sun cooks the grease out and winter overnight freezes seize the pin. A gate sags in the hinge post, not in the middle, and that’s where we start. We replace fatigued hinges and latch hardware and re-hang the gate so it swings true again.

Post Replacement
A sagging gate almost always traces back to the post. In Boulder City’s historic district, we hand-dig around an old post to locate the 1930s irrigation ditches and unmapped federal-era utility lines that run along property boundaries before we set a new footing. Fix the panel without the post and you’ll fix it twice.

Rail Repair
Blowing sand and monsoon winds work rails loose over the years, and a rail that’s pulled free lets the whole gate rack and bind. We weld broken and loosened rails back on site, straighten the frame, and check the diagonals so the gate doesn’t twist itself out of square again next wind season.

Custom Welding
We do real welding in your driveway, not a patch-and-paint job. That means repairing wrought-iron frames, welding new hinge plates to old steel, fabricating a missing section, or building a heavy-duty farm gate for an acreage entrance that a flimsy store-bought gate can’t handle. On-site means one trip and no loading a gate onto a trailer.
Trusted Brands We Service in Boulder City
We’re certified to service nine major gate brands, and on Boulder City jobs you’ll most often see Linear and DoorKing on the automatic swing gates and Ghost Controls on the solar operators out toward the longer driveways. Viking swing operators turn up on the older HOA and rural entrances too. We don’t keep parts in stock at some warehouse; we diagnose what’s failing, tell you what it needs, and get the right part fast so a jammed gate doesn’t sit broken for a week.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Boulder City Homes
- Cracked piers and seized hinges on 1930s-1950s wrought-iron gates. The original hardware takes desert sun all summer and overnight freezes in winter, and after 70-plus years the hinge pins seize and the masonry piers crack. It’s metal fatigue, not abuse, and it’s repairable.
- Blowing sand and monsoon winds jamming slide-gate tracks and rollers. Grit packs into the track and rollers and the gate starts to drag or stall. A good cleaning, worn rollers swapped out, and a track realignment usually settles it.
- Warped vinyl and binding aluminum rollers on 1990s-2000s HOA patio-home gates. The intense summer sun warps vinyl panels and the aluminum rollers bind in the heat. These are newer gates, but they’re past their first cycle of wear now.
- Heaved or rusted-through hinge posts on long-driveway swing gates. When a post heaves, the gate sags and drags on the ground; hand-digging to clear old utilities is part of resetting the footing right.
Pricing for Gate Parts & Welding in Boulder City, NV
Here’s roughly what gate parts and welding run in Boulder City. A typical hinge replacement runs $150-$350 depending on how much of the old hardware has to be cut free. Resetting or replacing a hinge post, hand-dug around the historic district’s old lines, runs $250-$600. Rail repair and re-welding usually lands at $120-$300, and custom welding or a fabricated gate section runs $300-$900 depending on span and weight. The price we quote is the price you pay – it’s agreed before any work starts, so the number on the invoice matches the number on the estimate. Senior and veteran discounts of 10% apply, and $40 comes off any repair over $200. Estimates are free.
We Also Serve Cities Near Boulder City
If you’re just outside Boulder City, we cover the towns around it too: Henderson, Whitney, Paradise, and Enterprise. Same crew, same written promise, same straight pricing. Wherever you are, the person who shows up is the one who stands behind it, and Boulder City is our home turf.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Boulder City
Because the historic district was laid out in the 1930s with irrigation ditches and unmapped federal-era utility lines running right along property boundaries, so setting a new post means locating those lines by hand before we cut a footing. That condition doesn’t exist in newer metro subdivisions, and it’s why we never just power-dig here. Call (844) 761-8729 for an exact quote – estimates are free.
Usually it’s both, and the post is the one that matters. A gate sags in the hinge post first; once the post heaves, the fatigued hinges and the frame go with it. We check the post footing and the hinge hardware together, hand-digging around old lines if we have to reset the post, then replace the hinges so it swings true. Call (844) 761-8729 for a free estimate.
Yes, and it’s often the smarter call for acreage entrances where running mains power out to the gate is impractical or expensive. Ghost Controls solar operators are built for exactly this – they handle a long driveway on a charged battery and a panel rather than a buried power run. We’ll look at your span and gate weight and tell you honestly whether solar or mains makes more sense. Call (844) 761-8729 – a free measure and a written price, no pressure.
Blowing sand and monsoon winds are the usual culprits – grit packs into slide-gate tracks and rollers, and grit works its way into the operator too. Add the summer heat cooking the operator’s motor on the older swing gates and warping vinyl, and wear builds up faster here than in a milder climate. A track cleaning, worn roller swap, and operator service usually puts it right. Call (844) 761-8729 for an exact quote.
Automatic gate operators should always have entrapment protection – safety edges, photo eyes, and a proper reversing function – and we install and check all of it. Sloppy wiring on an auto gate is a real hazard, so this isn’t a job for a weekend patch-up; a trained pro should handle the operator and its safety devices. Call (844) 761-8729 – the estimate is free and we’ll spell out exactly what the gate needs.
Give us a call at (844) 761-8729 for a free estimate on gate parts and welding in Boulder City. A live person answers 24/7, we’ll be there in a window we actually keep, and the price is agreed before we touch the gate.
Written by the team at Gatewood Fence & Gate Sunrise Manor.