Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Henderson
If your gate has stopped latching, jumped its track, or started grinding every time it opens, we can help. We’re your local Gate Parts & Welding team, and we work on gates all over Henderson, from the tight shared driveways off Green Valley Parkway to the hillside lots up in Seven Hills and Anthem. The desert here is hard on gates. Caliche moves under the posts, the sun cooks the electronics, and the grit gets into every roller and hinge. That’s the kind of work we see every week, and we know how to fix it without selling you a whole new gate. Call (844) 761-8729 for a free estimate.
Why Gatewood Fence & Gate Sunrise Manor Is Henderson’s Preferred Gate Parts & Welding Company
Henderson homeowners have a habit of getting burned by outfits that quote one price on the phone and charge another at the door. We don’t work that way. We’re locally owned and owner-operated, the name is on the shop, and every job comes with our 90-Day Done Right Promise stamped in writing. If it isn’t right, one call brings us back. That’s the whole guarantee, no fine print.
When you ring us, a live person answers. Not voicemail, not a queue three states away. Our technicians have up to 25 years of experience and are background-checked and certified to service nine major gate brands, including LiftMaster, FAAC, BFT, and Linear. We work the Henderson neighborhoods in ZIP codes 89015, 89002, 89052, and 89009, and we know the difference between a problem on a flat Green Valley tract lot and one on an Anthem hillside footing. The person who quotes your job is the person who stands behind it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Henderson
Hinge Replacement
A gate sags at the hinge post, not in the middle. On the shared-driveway swing gates common through Green Valley and MacDonald Ranch, windblown desert grit works into the hinges and the pin wears the barrel, so the whole gate drops and drags. We replace the hinge set on site and true the post side, because welding the panel without fixing the post means you’ll fix it twice. A typical Henderson hinge replacement runs $150-$320 depending on how many hinges and whether the post needs a weld repair.

Post Replacement
This is the big one in Henderson. Those 1990s-2000s master-planned tracts are hitting end-of-life on original builder-grade steel gates and operators all at once, and the undersized footing anchors many of them sit on don’t hold against caliche movement. When the post has drifted, no amount of track adjustment will keep a slide gate on its rail. We re-pour deeper, wider footings and reset the post before we touch the operator. Typical post replacement in Henderson runs $400-$900 depending on depth and access.

Rail Repair
On the flatter lots, a sliding gate that jumps its rail usually traces to worn rollers or a sagging hinge-side post, not the ground. We correct the panel at the post and replace the rollers rather than re-welding mid-span, which is the fix that holds up past one summer. On the hillsides in Seven Hills and Anthem, we check the footing anchors first because that rail is telling you the posts moved. Rail repair in Henderson typically runs $200-$550.

Custom Welding
Bent rails, cracked panels, gate frames that caught the wrong bumper: we weld on site so the gate stays in your driveway instead of getting hauled to a yard for a week. On a tight Henderson shared driveway or a right of way where access has to keep working, that matters. Custom weld work in Henderson generally runs $180-$500 depending on the section.
Trusted Brands We Service in Henderson
We’re certified to service nine major gate brands, and in Henderson the ones we see most are LiftMaster, FAAC, BFT, and Linear. When the control board or a keypad dies on a 15-20 year old builder-grade system, we order the right part for the exact model rather than swapping in whatever is close. We don’t claim parts sitting on a shelf; we source what fits your gate, and we tell you the lead time up front. If a genuine OEM part is weeks out and a compatible one is days out, you hear both options and the price for each before we order anything.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Henderson Homes
- Slide gates jumping the track in Anthem and Seven Hills. Caliche heaves two or three original undersized footing anchors, and re-welding the rail alone won’t hold; the footings and posts have to be reset first.
- UV-baked control boards, photocells, and keypads. The Mojave sun destroys operator electronics on the 15-20 year old systems still running across these subdivisions, so a gate that “just stopped” often needs a board, not a motor.
- Grit-seized rollers and hinges on shared-driveway swing gates. Windblown desert grit compounds hinge-post sag until the gate drags and won’t latch, and the fix starts at the post side, not the panel.
- Aging manual gates near downtown Water Street and Boulder Highway. The older, lower-priced homes here carry manual gates with hardware that doesn’t match the master-planned tracts, so the right parts are different entirely.
Pricing for Gate Parts & Welding in Henderson, NV
We use upfront, no-hassle pricing: the number we give you is the number you pay, and it’s quoted and agreed before any work starts. Typical gate parts and welding ranges for the Henderson market:
| Job | Typical Henderson Range |
|---|---|
| Hinge replacement | $150-$320 |
| Gate rollers | $120-$280 |
| Latch & lock replacement | $120-$300 |
| Rail repair | $200-$550 |
| Custom welding | $180-$500 |
| Post replacement (caliche re-pour) | $400-$900 |
What moves the number: how deep the post re-pour goes, whether the operator and its board need servicing on top of the metal work, and access on a tight shared driveway. We offer a free second opinion on any written estimate, $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (844) 761-8729 for an exact quote; estimates are free.
We Also Serve Cities Near Henderson
Henderson is home base for this work, but we also serve the surrounding communities. If you’re over in Boulder City, or just across in Whitney, Paradise, or Enterprise, we cover you too. Same upfront pricing, same 90-Day Done Right Promise. You can see the full picture of Gate Parts & Welding in Henderson and the nearby cities on our city page.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Henderson
Your sliding gate jumps the track because the posts have moved, not because the rail is bent. Caliche under these subdivisions heaves undersized footing anchors, and re-welding the rail alone won’t hold. The fix is re-pouring deeper, wider footings and resetting the posts first. Call (844) 761-8729 for a free estimate.
Yes, a dead control board is common in Henderson after a handful of summers. The intense UV and the big day-night temperature swing bake the electronics on 15-20 year old builder-grade systems long before the motor itself fails. We test the board, sensors, and keypad before recommending a replacement. Call (844) 761-8729 and we’ll give you a straight answer.
Usually yes, but it takes measuring, not guessing. On shared driveways and rights of way where a swing arc would hit a car or block access, a slide gate is often the right call, and we work out the track, footing, and operator layout around your actual clearances. This kind of work is quoted and scheduled, not same-day. Call (844) 761-8729 for a free measure and a written price.
The sag is in the hinge post, not the panel. Windblown grit seizes the hinges and the post side drifts, so the whole gate hangs wrong even though the steel looks straight. We correct it at the post rather than welding mid-span. A Henderson hinge replacement typically runs $150-$320. Call (844) 761-8729 for an exact quote.
Yes, any automatic gate should have working entrapment protection, meaning photocells and safety edges that stop or reverse the gate when something is in its path. On older Henderson systems those sensor plastics and boards are often the first parts the UV kills, so we check them on every operator call. If yours are failing, we’ll tell you plainly. Call (844) 761-8729 for a free estimate.
If your gate is dragging, jumping, or just not acting right, don’t wait for it to fail all the way. Call (844) 761-8729 for a free estimate on gate parts and welding anywhere in Henderson. A live person answers around the clock, the price is agreed before work starts, and the 90-Day Done Right Promise is in writing on the job.
Written by the team at Gatewood Fence & Gate Sunrise Manor.